Lift & Leveling kit Holiday Season Sale!

[khoaphan03]

Hi Jason,

i'm guessing i'll use my first post to inquire about the kit. Is it still on sale?
do you think the 3/2 kit will look nice? do you have any picture?

i only skimmed through the pages, i saw mostly 2/2 1/2... but i kinda want to lift the front to 3 inches.

thanks in advance

Just saw this now! Nice. Clean. Truck.


5th gen lift & leveling kits at Burtman Industries

 

[Terbston]

Hi Jason,

i'm guessing i'll use my first post to inquire about the kit. Is it still on sale?
do you think the 3/2 kit will look nice? do you have any picture?

i only skimmed through the pages, i saw mostly 2/2 1/2... but i kinda want to lift the front to 3 inches.

thanks in advance

Yeah, I am in the same boat. I would like to learn more/see some pics of 3/2 combo. What shocks/ springs or coilovers or both are needed for the 3/2 lift?

 

[17CementTRD]

Just got cornfed 2/1.5 kit installed. Looks like it is pretty darn level to me!

 

[seriouscoin1]

Here is the cornfed 3/2 lift I installed this past weekend.


Sent from my iPhone using Tapatalk

 

[seriouscoin1]

Here is the cornfed 3/2 lift I installed this past weekend.


Sent from my iPhone using Tapatalk

Stock everything. I did add the dif drop from toytec which is recommended from cornfed.


Sent from my iPhone using Tapatalk

 

[khoaphan03]

Stock everything. I did add the dif drop from toytec which is recommended from cornfed.


Sent from my iPhone using Tapatalk

nice ride thank you for the picture.
did you do it yourself? i was just talking to a guy who works at Toyota dealer.
he quoted me $600 for installation and alignment. I almost flipped him off.

 

[seriouscoin1]

nice ride thank you for the picture.

did you do it yourself? i was just talking to a guy who works at Toyota dealer.

he quoted me $600 for installation and alignment. I almost flipped him off.

Yeah I would too! I got the coil compressor from oreillys for free. Just grab a case of beer and have a buddy help you on the weekend. Definitely did need an alignment when I was done though.

 

[seriouscoin1]

Yeah I would too! I got the coil compressor from oreillys for free. Just grab a case of beer and have a buddy help you on the weekend. Definitely did need an alignment when I was done though.

My brother and I did it in a night.


Sent from my iPhone using Tapatalk

 

[khoaphan03]

Stock everything. I did add the dif drop from toytec which is recommended from cornfed.


Sent from my iPhone using Tapatalk

so do you have to add the dif drop? i've read somewhere that you don't have to do that. is it ok if i don't add it?

 

[seriouscoin1]

so do you have to add the dif drop? i've read somewhere that you don't have to do that. is it ok if i don't add it?

Corn fed recommended it. There are several other lifts that recommend it for anything 2.5-3" and above. I just did it for piece of mind.


Sent from my iPad using Tapatalk

 

[rob97ag]

Here is the cornfed 3/2 lift I installed this past weekend.


Sent from my iPhone using Tapatalk

I've seen numerous references about needing new upper control arms when lifting the front > 3"... u do anything in that area?

 

[seriouscoin1]

I've seen numerous references about needing new upper control arms when lifting the front > 3"... u do anything in that area?

I have heard some have had to if they are unable to get it aligned properly. They were able to align mine. Maybe after bigger tires?


Sent from my iPhone using Tapatalk

 

[Jason B]

You shouldn't need to replace anything after installing this kit. These kits also have a great track record because the kits are super similiar to the 4th gen setup which I've been selling since late 2004, suspension are very similar luckily.

Now, 285's will fit on this kit with the 2/1 or 2/1.5.

5th gen lift & leveling kits at Burtman Industries - you can also call to order or text 717-319-2100

 

[AZCement]

Just got cornfed 2/1.5 kit installed. Looks like it is pretty darn level to me!

I have no clue where the term "cornfed" comes from but people seems to use it generically.

The only two suppliers I have seen that refer to "cornfed" is Burtman Industries and then Cornfed Susupensions...which one did you end up going with?.. and why? (if you don't mind me asking)

Thank you

 

[TRD904Runner]

Cornfed 2.25"/2"

Thanks Jason for customizing to fit anyone and everyone. Couldn't be happier with the lift and the way it sits! 285/70/17 STT Pro fit nicely with a little bit of cutting and fender mod. Even got to keep my 1.25" Spidertraxx Jason sold me back in late 2014. 2-3 hour install with a little help.

 

[Lindenwood]

Finally got the lift installed on the wife's truck! 2" front and rear. Very happy with the stance and maintaining the factory rake. She says the lift makes her 33s look small, so she is asking for 35s now .

I haven't actually driven it yet since the install, but she says it indeed feels a bit stiffer (but she likes it!).

 

[Jason B]

Finally got the lift installed on the wife's truck! 2" front and rear. Very happy with the stance and maintaining the factory rake. She says the lift makes her 33s look small, so she is asking for 35s now .

I haven't actually driven it yet since the install, but she says it indeed feels a bit stiffer (but she likes it!).

Looks great! Missed these pics! Sweet.

285's will fit on this truck with the 2/1 or 2/1.5.

5th gen lift & leveling kits at Burtman Industries - you can also call to order or text 717-319-2100

 

[Lindenwood]

Looks great! Missed these pics! Sweet.

285's will fit on this truck with the 2/1 or 2/1.5.

5th gen lift & leveling kits at Burtman Industries

By the way, thanks again for letting me exhange the 2/1 lift for the 2/2 kit! We are still super happy with the lift. Eyeballing several things on your site for my 3rd fen as well!

 

[theMJof91]

Hey - for those going with 285s, what kind of work did you have to do to get it to work w/ no rub @ full lock? Would 275s fit fine without moldings?

Also - whats a realistic price range I should expect for installation from a dealer.

 

[Jason B]

Hey - for those going with 285s, what kind of work did you have to do to get it to work w/ no rub @ full lock? Would 275s fit fine without moldings?

Also - whats a realistic price range I should expect for installation from a dealer.

With stock wheels and just the 2/1, you won't rub with 285's.

5th gen lift & leveling kits at Burtman Industries - you can also call to order or text 717-319-2100

Install 2-3 hours for a dealer.