Greasemonkey88
New member
Ok, first of all this is my first post, and I wish it was for happier reasons. I recently replaced the drive belts on my 95 4runner, v6, m/t. I removed the battery to better access the p/a belt. I went to reconnect the battery after I replaced the belts and the battery arched and popped the 80amp main fuse. Without thinking, I put the neg. cable on first. I've tried new fuses, but as soon as I plug the fuse in or connect the battery it immediately pops. No, I am not mixing up pos. and neg. terminals. The ground off neg. terminal wire is tight. I do not see any burnt wires. I'm hoping someone can help me, I'm a glorified wrench, I'm not great with electrical. Thanks for any help!!!
