TOYLUVA
New member
Them bud built skids are a necessity for that kind of wheeling. them rocks looked nasty. but you made it. pretty work.
Master Video Thread. Lets see what your 4th gen has!!!
- Thread starter TOYLUVA
- Start date
Them bud built skids are a necessity for that kind of wheeling. them rocks looked nasty. but you made it. pretty work.
Tradera
New member
Dude, details on that winch mount, please.
zstampe
New member
Goddammit, now I need to upgrade to a 1nch body lift and 285's with my current OME setup after seeing your truck ha ha.
Tradera
New member
link to winch plate scroll down a bit
I've only used it once but that was a very solid high center.
You cant see it in the vid but both back tires came off the ground to get over that ledge.
Tradera
New member
Thanks Man, that body lift didn't help out the factory running boards that day.
I think my next purchase will def be some sliders.
zstampe
New member
Good call, my next purchase will be either what I said above or a demello bumper. I love my ome stuff so far.
SkylineGTRracer
New member
Here's some 4runner vs camaro action. I ran a 14.88, camaro ran a 15.03.
YouTube - 4Runner race
here's the slip
YouTube - 4Runner race
here's the slip
Attachments
Last edited:
SkylineGTRracer
New member
Thank you. You should have seen his face when I passed him! 0_0 I did manage to go a little faster. The best I could do was a 14.4. I can't wait for more tuning!
SkylineGTRracer
New member
For your enjoyment.
YouTube - 4Runner vs fusion
YouTube - 4runner vs eclipse
YouTube - 4runner drag
YouTube - 4Runner vs fusion
YouTube - 4runner vs eclipse
YouTube - 4runner drag
SkylineGTRracer
New member
Haha thanks, no not yet. I might after I get my cams (stage 3) in and do some work on my exhaust. And work on my trans and rear end. I'm never done tuning!
stanleybb50
New member
What kinds of tuning/mods have you done? Very nice!
Sent from my LS670 using Tapatalk
SkylineGTRracer
New member
Well as of right now I got a AFE stage II intake, NST intake manifold spacer, Longtubes for the 2nd gen 1grfe, URD fuel pump (not really a performance mod, but I can change the filter whenever now
) and the APR X1 running the F3 tune. I'm still N/A not that I mind it I think its a good balance when I autox. But now that I'm upgrading everything like brakes, suspension, more weight reduction, and transmission and diff upgrades more power wouldn't hurt. Just gotta keep improving my skills as a driver.
) and the APR X1 running the F3 tune. I'm still N/A not that I mind it I think its a good balance when I autox. But now that I'm upgrading everything like brakes, suspension, more weight reduction, and transmission and diff upgrades more power wouldn't hurt. Just gotta keep improving my skills as a driver.
Whitebeauty
New member
Hell Yeah!!! I run the about the same on the 1/4. i did mine on a dyno though..ive done 1/8th which has put me in the 9.4 class. On the dyno i put out about 255tq and i believe 224hp..i will get my sheet and post it for u all
Last edited:
SkylineGTRracer
New member
Were you running F3 when doing that dyno?
Whitebeauty
New member
To tell u the truth I believe its a custom map APR did for me.
stanleybb50
New member
I figured this thread could use a "bump". Hopefully some of you have made it out wheelin now that it's getting nice out.
***The below videos are NOT my 4Runner and I did not create them, but I was browsing around YouTube for T4R video's and stumbled across these:
This one I was partial to because it's the same color as my Runner and is stock like mine. It's nice to see what mine would look like! YouTube - 4runner Off Road
Serious mud here! YouTube - 2006 4runner Mud Bog
More mud, worth checking out at least: YouTube - Toyota 4Runners mudding
Give this one about 30 secs or so for the wheelin to start. Good song for the video on this one too: YouTube - 2003 4runner offroad project
I thought this one was definitely worth posting. It's not a wheelin video or anything, but it shows (not real detailed) but breaks down the process of installing front spacers for those that might not know (like me): YouTube - Velocity Off-Road Tacoma 4Runner / Tacoma / FJ Install
Similar to the last vid for a spacer install, but its a 05-10 Taco front + rear spacer install + quality Taco wheel'in after install: YouTube - Toyota Tacoma Lift Kit Install and Off-Roading
And here's the original "MotorWeek" video/review for the 4th Gens when they were new in '03: http://www.youtube.com/watch?v=kXZA5SHnpf8
(Also, sorry if any of these were already posted. I had gone through and watched all the vids on this thread awhile ago, but forget what's all in here).
Again, not my vid's but good ones. Anyone want to claim one?
***The below videos are NOT my 4Runner and I did not create them, but I was browsing around YouTube for T4R video's and stumbled across these:
This one I was partial to because it's the same color as my Runner and is stock like mine. It's nice to see what mine would look like! YouTube - 4runner Off Road
Serious mud here! YouTube - 2006 4runner Mud Bog
More mud, worth checking out at least: YouTube - Toyota 4Runners mudding
Give this one about 30 secs or so for the wheelin to start. Good song for the video on this one too: YouTube - 2003 4runner offroad project
I thought this one was definitely worth posting. It's not a wheelin video or anything, but it shows (not real detailed) but breaks down the process of installing front spacers for those that might not know (like me): YouTube - Velocity Off-Road Tacoma 4Runner / Tacoma / FJ Install
Similar to the last vid for a spacer install, but its a 05-10 Taco front + rear spacer install + quality Taco wheel'in after install: YouTube - Toyota Tacoma Lift Kit Install and Off-Roading
And here's the original "MotorWeek" video/review for the 4th Gens when they were new in '03: http://www.youtube.com/watch?v=kXZA5SHnpf8
(Also, sorry if any of these were already posted. I had gone through and watched all the vids on this thread awhile ago, but forget what's all in here).
Again, not my vid's but good ones. Anyone want to claim one?
Last edited:
Similar threads
