Minnesota - Wisconsin - Iowa

[dodder]

I figured we need a MN Wisc IA crew on here. There are few of us but I know there are some of you out there.

How about we start with a recent pic of your ride and the next mod you have planned?

I have 5100's on order to mate with some FJ coils and a rear spacer.

From Last weeks snow:


Some MN WI IA people I have noticed

[MENTION=43240]RPC[/MENTION]
[MENTION=96232]dubs283[/MENTION]
[MENTION=32177]A10MileHusker[/MENTION]
[MENTION=84976]tony_4r[/MENTION]

 

[tony_4r]

Here is a picture from the inside on a veryyyy cold day.... which matches your outside picture. All the fluids were coldddddd!!!

 

[tony_4r]

My next mod is to add 3/4" Cornfed spacers to my rear springs in addition to air springs. I have the Bilstein 5100 on front at 1 3/4", 5100 on rear, with FJ springs all around.
The air srings will have a custom made air fill inlet on the inside of the truck with gauge plus an inlet on the outside.

 

[dodder]

Ordered my 5100's and cornfed spacer, will soon have everything I need.

I also just removed my Hcf, surprisingly noticable throttle change. Adding high flow drop in dry filter tomorrow.

Oh and I some light ideas coming soon.

 

[acj990]

Iowa

I'm a newbie as of the past weekend, just purchased a 2010 SR5. I've been a fan of the 4Runners for a long time and was finally able to buy one. Looking forward to tweaking it and driving my lil man to daycare through the fields.

 

[dodder]

Welcome to the group! Got any immediate plans for your runner?

 

[jr19]

Just picked up a 2008 SR5 last Friday. So far, so good. I was driving a 2001 Mitsubishi Eclipse before this so it's definitely a change. But it's a good one.

 

[krenaud33]

I am planning to go to the Make it or Break it event this weekend. Most likely going down on Saturday.(usually have a good barbeque Saturday night that is included with admission) Who else is interested?



FYI - There are trails for mildly built and stock rigs.

Event Pricing

NOTE: Event prices have been increased, due to land usage fees. This is effective Memorial Day 2013


Members:

$45 per vehicle for the entire event or $35 per vehicle, per day

Non-members:

$65 per vehicle for the entire event or $35 per vehicle, per day


Camping:

$5 camping per day with no electricity (tents or RV's). Tents with electricity are $10. RV's with electricity are $15.


Admission covers the vehicle, you (the driver) and immediate family members.

Additional vehicle occupants going on the trail will be $5 each for the entire event.


Don't hesitate in calling or texting MIOBI if you have any questions.

(216) 2MIOBI2 --- (216) 264-6242

 

[krenaud33]

Event this weekend......
http://www.toyota-4runner.org/off-r...ct-25-26-benefit-toys-4-tots.html#post1822589

 

[TDiddy]

Des Moines

I'm thinking about getting a 2.5" toytec lift (FJ3-RCC) for a 2013 4Runner. Unfortunately I won't have the time or space for a DIY install. Can anyone recommend a shop in Des Moines for this?

 

[yotaguy674]

New guy from Northeast Iowa here.:hello:

 

[Erkelbot]

Add me to the list of MN folks.

I figured we need a MN Wisc IA crew on here. There are few of us but I know there are some of you out there.

How about we start with a recent pic of your ride and the next mod you have planned?

I have 5100's on order to mate with some FJ coils and a rear spacer.

From Last weeks snow:
View attachment 111494

Some MN WI IA people I have noticed

[MENTION=43240]RPC[/MENTION]
[MENTION=96232]dubs283[/MENTION]
[MENTION=32177]A10MileHusker[/MENTION]
[MENTION=84976]tony_4r[/MENTION]

 

[99LimWiscoRunner]

Add me to the WI guys. NW Wisc. might be a decent place for everyone to meet. I think Chequamegon National Forest has some trails.

 

[mke4runner]

I screwed up

Does anyone know how to take apart a steering wheel? My horn randomly goes off sometimes...:roadkill:
Help