Missing hose??

[smallfry]

Am I missing a hose here? If so where does it run?

2000 4runner, V6

 

[rjaudi]

Mine goes to a pipe under the throttle cable adjustment bolt. Its where the throttle body meets the intake manifold. You are missing another hose. You see where you have clips but nothing in them.

 

[brian2sun]

You're truck is going to run a lot better without vacuum leaks!

 

[smallfry]

Mine goes to a pipe under the throttle cable adjustment bolt. Its where the throttle body meets the intake manifold. You are missing another hose. You see where you have clips but nothing in them.

I'll look to see where that runs then

You're truck is going to run a lot better without vacuum leaks!

My 4runner has ran fine without it, which I'm surpised at. Doesn't throw any codes.

Where would be a good place to get the hose?

 

[brian2sun]

You can just buy some hose at O'Reilly's or something and cut to fit. It doesn't have to be special hose or anything so I wouldn't pay dealer prices.

 

[Elton H]

look like the line going to the Fuel Pressure Regulator ?

 

[smallfry]

Okay, I hate to admit this but I forgot to plug the hose back in the other night when I had it apart to clean the throttle body.:ybrick::ybrick:

It's back together now. :redbrick:

 

[jsmarine]

Okay, I hate to admit this but I forgot to plug the hose back in the other night when I had it apart to clean the throttle body.:ybrick::ybrick:

It's back together now. :redbrick:

It happens to all of us every now and then :bigok:

 

[Duhockey]

Okay, I hate to admit this but I forgot to plug the hose back in the other night when I had it apart to clean the throttle body.:ybrick::ybrick:

It's back together now. :redbrick:

I forgot that same hose when I rehooked up my intake after cleaning my maf and my throttle body, but mine is even worse since its a K&N and that box is gone, and there is a 3way connection there and I plugged in two of them!

I was like, why the heck is it idling so frickin high and wont come down!!
:ybrick: