Hey all, I am rebuilding my entire AC system because why not? I'm already in too deep, replacing the evaporator core. Well, in my search for new hoses, I purchased some from RockAuto. Upon arrival, I did not verify that they were the same as the originals, and I threw the originals away. I am specifically talking about the large suction hose that crosses in front of the engine. As I go to install this new hose, I realize that I will not work with the suction pipe that is coming out of the firewall. I get back online and come to find out there are many iterations of the AC pipes/hoses, and of course the one that I can't find anywhere is the one I need. I could solve my problem by updating all of the hoses and pipes, but I would rather not do that. For reference, I have an early-production 2004 V6 SR5. I will attach some pictures of the pipe I have and the hose I need.
I believe this is the right schematic for my car, but it was labeled as a 2003 repair manual.
I ordered this part because it looked right in the product pictures, specifically the fittings. Notice how the fittings turn sharply, similar to the picture above. That is what I am looking for.
Here is the firewall pipe I am trying to find a mate for.
I believe this is the right schematic for my car, but it was labeled as a 2003 repair manual.
I ordered this part because it looked right in the product pictures, specifically the fittings. Notice how the fittings turn sharply, similar to the picture above. That is what I am looking for.
Here is the firewall pipe I am trying to find a mate for.