momo.75's '03 Sport 4.7L V8 Build
- Thread starter momo.75
- Start date
momo.75
Registered User
I was wondering how you and the rack were doing the other day. Shoot me a pm with your address.
I haven't had any issues at all. Very pleased with it.
Thanks man!
November Sun
Member
I get all of compliments on the rack all the time, I'll hit you up.
Bluesky 07
Senior Member
Just some updated pics
So that was the glow from the southwest the other night... ;-)
Tuyrunner
New member
Just some updated pics
Good lord that thing is so clean! I would be in heaven if mine Looked half that good!
Sent from my iPhone using Tapatalk
Tuyrunner
New member
I bought my 2003 Sport Edition in November 21, 2002. I had it for several years before making any mods. It will be a while before I sell this truck.
08.23.19
Joined the 200K Club
01.10.19
Well, after a little incident i decided to switch things up a little bit. I went from my Polished 18" Methods to Satin Black 17" Icon Rebounds wrapped with 285/70 17 Falken Wildpeak AT3W tires. I guess it changed the look a little....lol.
First two pics are right after I switched out the gray cladding for color matched cladding. 01.10.18
pics as of June 19, 2016
updated 07.24.15
Suspension/lift/tires/wheels:
- OME 884/Icon Overland Springs
- Bilstein 5100 Shocks front
- Icon 2.0 Shocks rear
- Camburg Ball Joints UCA's with MOOG Ball Joints
- 285/70 17 Falken Wildpeak AT3W
- 17x8.5 Satin Black Icon Rebound, 0 offset
- .75" BORA Wheel Spacers
- Gorrilla CHROME Spline Drive E/T Ultra Style Conical Lug Nuts
- 285/65 18 BFG A/T KO's (Gone!)
- 18x9 Machine Finished Method Standards #MR301, -12 offset (SOLD)
Exterior/outfitting:
- Demello Offroad Front Bumper
- Demello Sliders
- RSG Metalworks Body Mount Chop plates
- CBI Rear Bumper with Dual Swing out Tire and fuel can carrier
- Smittybilt XRC 9500 Winch
- Factor 55 Flatlink
- PIAA 5370 Black LED Fog Lamp Kit
- RCI Front Skid Plate
- Ricochet LCA Skids
- Tint on front windows to match
- Replaced gray cladding with color-matched cladding
- Painted door handles, grill and rear hatch piece to match body
- Sherpa Equipment Co. PRINCETON Roof Rack
- X6S Slim Series Amber White 44" Single Row LED Light Bar (Extreme LED)
- X6S Slim Series Amber 6" Single Row LED Light Bar x2 as dust lights (Extreme LED)
- Solid Shift Concepts scene light Mounts (roof rack side rails)
- Code 4 LED Scene Lights (roof rack side rails)
- SwitchPros SP-9100
- Whitson Metalworks full length roof rack (SOLD)
- 40" Hanma Single Row LED Light Bar (SOLD)
- TRS 5000 HID Low Beams
- Blacked out '06 headlights
- 06-09 LED Tail Lights
- LED Reverse Lights
Interior:
- Gray Leather
- GTA Car Kit Blue Tooth Module
- Premium JBL System
- Weathertech All Weather Mats
- V-Leds Interior Swap
- JL Audio 8" Sub in Stock Location
Did you end up painting your cladding or just replacing it?
Sent from my iPhone using Tapatalk
momo.75
Registered User
HAHAHA....I love some lighting
Detailing is my happy place...lol
I had debated painting the gray cladding for years but there is a pretty extensive process to get it prepared for painting so the paint will stick. I was lucky to find a silver 4Runner that was being parted out after a roll over. The owner gave me a great deal to come pull those pieces. I then found a painter that color matched them for me. It was well worth it.
Tuyrunner
New member
Absolutely man! Changes the entire look of the vehicle. I have been thinking about doing the same for years just never pulled the trigger.
Sent from my iPhone using Tapatalk
momo.75
Registered User
Thanks man
Unner
New member
Looks good as always! What do you use to keep the black so clear and deep looking? My black 3rd gen doesn't shine quite like that when it's clean it seems.
And how do you like the STEDI lights? I remember looking at them before I went with the Primelux ones off Amazon for my front bumper.
And how do you like the STEDI lights? I remember looking at them before I went with the Primelux ones off Amazon for my front bumper.
momo.75
Registered User
Thanks man. I exclusively use Shine Supply products on our cars. I will usually do a complete paint correction on it at least once a year and then just maintain it the rest of the year. Using a good sealer and top coat is the main thing. This next time I do it I will be applying a ceramic coat on it.
I love the STEDI lights. The build quality is great and the output is amazing!
Yeah the Stedi's look great!
momo.75
Registered User
Thanks man. I had been wanting to add something to the front bumper but just wasn't sure what. A light bar would have been too low profile. These 7" STEDI lights fit perfection the space.
Hog_runner
New member
nice build
momo.75
Registered User
yeah man, shoot me a dm on IG with so I can follow you. :rockon:
Similar threads
