MTD's ForeRunner Build - Narrated by Jeremy Clarkson & James May

[jstim]

Well I may sell these for the ultra gauge, but I do not have ScanGauge to design from so I don't think I will be able to do that. If you ever get an Ultra Gauge though I will be selling them lol.

Keep us posted, I know this raises at least one brow of interest.

 

[MTD]

Keep us posted, I know this raises at least one brow of interest.

Will do. I think I am gonna make a little thread with all the 3d printed parts for 3rd gens. That way suggestions can be made and I can include links to sale threads.

 

[jeff88]

Damn, I was totally going to say UltraGauge! You gave it away too quickly! I am interested in what it looks like installed, as mine is currently resting on my unuseable ashtray.

 

[MTD]

Damn, I was totally going to say UltraGauge! You gave it away too quickly! I am interested in what it looks like installed, as mine is currently resting on my unuseable ashtray.

Haha sorry excitement got the better of me i guess. I am going to print a proto type tonight. Right now i I am trying to figure out how I'm going to use the buttons. I have a few ideas but nothing solid yet...

 

[farmerjon]

I love my UG - would be interested in this. Would this be a pillar pod or what? Nice build!

 

[MTD]

I love my UG - would be interested in this. Would this be a pillar pod or what? Nice build!

Yep this is for the A pillar, it will look very similar to the cobalt ss pillar computer after its installed. Right now my issue is that there is no way to press the buttons so I'm trying to come up with either a button relocation system or making it work like if it where just velcroed to the dash.

 

[MTD]

 

[MTD]

So here is the new gauge. It's an AEM uego so far its awesome, but it is showing me that I should really tune this thing and soon! I also put white LED lights in the boost gauge which is pretty sharp.

 

[BrianSD_42]

I didn't realize the UltraGuage has a screen like that. Very nice job with the custom design.

 

[shootmymime]

MTD's ForeRunner Build - Narrated by Jeremy Clarkson & James May

So here is the new gauge. It's an AEM uego so far its awesome, but it is showing me that I should really tune this thing and soon! I also put white LED lights in the boost gauge which is pretty sharp.

It could be the computer learning what it needs. You can pull the EFI fuse to reset it and have it learn it all again.
You should be running around 14.7-8 normal driving then boost 2-up psi it should drop down to 11-12.5 at wot.

But yes tuning is the key.

 

[MTD]

It could be the computer learning what it needs. You can pull the EFI fuse to reset it and have it learn it all again.
You should be running around 14.7-8 normal driving then boost 2-up psi it should drop down to 11-12.5 at wot.

But yes tuning is the key.

Haha yeah, I'm about to drive through my garage... No that's just idling with no load. The computer is not going to learn lol they are pretty much set, so the next step is tuning... [emoji20]

 

[shootmymime]

Haha yeah, I'm about to drive through my garage... No that's just idling with no load. The computer is not going to learn lol they are pretty much set, so the next step is tuning... [emoji20]

im not so sure about that. mine has been in the 18s range and did not want to run worth a crap. it would stutter, no power and just not go. the timing would go crazy trying to adjust, the injectors would be cutting power and starting out to figure out what it was doing. then about 100 yards is starts to learn.

so i assume you have the CEL po172 for lean condition. i think it turns on around 15.5 ish.

where did you install your sensor in the exhaust? could that be giving out faulty reading from your placement?

 

[MTD]

im not so sure about that. mine has been in the 18s range and did not want to run worth a crap. it would stutter, no power and just not go. the timing would go crazy trying to adjust, the injectors would be cutting power and starting out to figure out what it was doing. then about 100 yards is starts to learn.

so i assume you have the CEL po172 for lean condition. i think it turns on around 15.5 ish.

where did you install your sensor in the exhaust? could that be giving out faulty reading from your placement?

mine runs perfect lol, no cel. At idle 14-15 is just fine and normal actually.

 

[shootmymime]

Then WTF is this Bulll $hit? did i just get had by you? lol :juggle:


ps. make that other picture above this one ^ smaller, i have to scroll so far i feel like im in china just to quote you any more.

 

[MTD]

Then WTF is this Bulll $hit? did i just get had by you? lol :juggle:


ps. make that other picture above this one ^ smaller, i have to scroll so far i feel like im in china just to quote you any more.

Haha Jesus H. Christ that pic is big! lol and yeah

 

[MTD]

There thats better lol

 

[MTD]

I get the feeling that this is spam ^^^

 

[MTD]

Oops I did it again! I hate paint lol... Getting ready for expo.

Its like watching paint dry...

 

[MTD]

Progress

 

[MTD]

Runs galore... I fricking HATE rattle can.. If I were home I would be able to use my gun and some proper paint. Oh well...