my 2014 4runner Tint, thoughts and advice

Great writeup.

I just told my tint guy (great service if you are in the Denver area milehighwindowtint dot com) that I had a black 2015 Trail and wanted to match the front windows exactly to the rear. He did it perfectly.

Matching and heat rejection performance are two different goals. So is night vision, cost, quality, etc.
 
Crystalline is a great product. I went with 3M. Huper is better for S-Class type cars that have a reflective OEM tint. 3M is more matte.
 
Matching and heat rejection performance are two different goals. So is night vision, cost, quality, etc.

Lifetime warranty, reputable company that stands behind their film with 20 years experience and they also do sky scrapers here in Denver. Think I am covered. :-)
 
I want to tint for my 4runner as well.. thank you for the write up. I also need the front strip on the windshield cuz I sometimes I get gaps in my sun visors.

1 question did you guys do the rear hatch as well ???

I need to do this soon cuz summer is coming and its gets super hott inside a all black car.
 
Last edited:
Just wanted to add my experience here. Just got my front windows tinted with Suntek Standard Pro at 15%. It matches pretty well from the outside but you can tell that its slightly darker than the rears. From the inside its extremely apparent that the shades of the windows are different.

17382478446_bfb63c8eae_b.jpg


17417286215_280db3a634_b.jpg
 
Last edited:
That's dangerously dark if you drive at night.

My previous car was 20% all around and my girlfriends car is 15% all around on a small hatchback. I never had any problems driving those cars at night. Another thing to note is that those previous photos were taken during rain and overcast weather. It looks darker from the outside than is actually is from the inside. Heres what it looked like with some early morning sun. I've decided to get the rear windows tinted to match the front since its clearly darker on front once the sun is out.

17403369596_215150d8e8_c.jpg
 
Last edited:
i went with 20% all around. well i thinks its actually 18%. some times at dark crossing in the middle of the night out in the country i'll have to roll a window down to be sure, but generally i don't find it "unsafe". you just need to be a bit more dilligent and mindful which is actually a good thing.
 
thanks roktoy for the great write up. this confirmed my shops recommendation to go with 3m tint color stable at 35% to best match factory tint.
 
I just got my front windows done in 35% Madico Charcool. They, too, result in a greenish hue when compared to the stock rear tint.

What is a fix? Go back and get the rest of the vehicle done in the same stuff just to darken it up and hide the green, or eat the cost? I'm not sure what other options the tint shop has, and I understand the solar green is built into the glass itself.
 
so here are some pics of my tints that i just got installed. I went with 3m tint color stable at 35%. you can still see that the back windows have a redish hue and the front are still greenish its close but still enough to bother me. depending on the direction of sun it can look different. But i can say that 35% is the perfect amount of darkness for when driving at night
 

Attachments

  • tint2.jpg
    tint2.jpg
    111.5 KB · Views: 4,127
  • tint1.jpg
    tint1.jpg
    124.1 KB · Views: 4,327
I didn't have a say on tinting my T4R because it was tinted my the distributor (Gulf States Toyota) before delivery, but they supposedly used 3M tint. Like some of you here, the light transmission is about the same but there is a slight greenish hue to the tint compared to the rear factory tint. Not really noticeable until I take a picture like this:

4runner-8.jpg
 
I opted to go with 20% front tint, stock rears. I think it matches about as close as possible given most tint options out there. I opted to go this route since I wanted the sun protection first, security second, and finally appearance. Driving at night has not been a problem for me. Product is the Llumar ATC 20%.

Here's the stock photo:




Here's the 20% fronts, stock rears:



The fronts do have a slight green tint, but this will be the case with any factory glass that has the green tint impregnated in the glass. Of course, sun angle, sunroof open/closed, etc will always have some effect on how tint appears. I find the front to only appear slightly darker than the rear depending on background i.e. a lighter background behind the vehicle will show this difference.
 
Great looking trucks to everyone!

My .02:

1) If you are looking to get your windows tinted, you owe it to yourself to checkout ceramic tints. That stuff is absolutely amazing. The heat rejection really makes a difference if you live anywhere warm.

2) I was always in the group of people that gave no sh*ts about tinting below the legal limit, until I got ticketed for it. $300 worth of ceramic tint had to be stripped out for a state re-inspection. Now, I only tint to the legal limit. The heat rejection on a 50% ceramic tint out performs any carbon limo tint you can find.
 
Just got mine tinted 15% front and 35% rear with formula one pinnacle ceramic. It looks good but the color difference is driving me nuts. Has anyone confirmed what tint has the least amount of green in it?
 
I was going to go with ceramic for better heat rejection, but it was noticeably the worst color match. I ended up with using less expensive 20% carbo tint on the fronts only. The tint level matched perfectly even though the math doesn't add up. From the outside the color match is also perfect, but from the inside on a bright day you notice the greener front windows.
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Trending content

Back
Top