Need part number

[Bigmd]

Ok searched high and low and I’m only able to find the part name but no part number . I’m looking for the “intake chamber stay” . It’s the part that bolts to the driver side of upper intake and lower goes to block I’m missing completely and need for my supercharger install. Or if someone has one I’d gladly pay for it. Thanks in advance .
Mike

 

[HiLife]

I think this is what you're taking about...
96-00 3.4l 17125-62060
01-02 3.4l 17125-62080

 

[mtbtim]

If you have wrecking yards in your area, like PickNPulls, do a search and see if they have a 3rd Gen 4runner or 1st Gen Tacoma in their lot. If the engine is still there, that lift bracket will be there as well most likely. That intake chamber stay is just a fancy term for an engine lift bracket for lifting the engine out of the vehicle.

You'll save money by grabbing one off a wrecked rig and who knows what other little goodies you can snag while you're there. If you've never experienced what it's like at a PickNPull yard, check out the video below.

When I can't find a part number online, I usually just bite the bullet and go to my local Toyota dealer because they will find me the part I need every time. Sometimes this convenience is worth paying the extra money to get the part you need right away.

 

[Bigmd]

Hilife that looks close but not sure. Tim I put in two requests online at Toyota salvage yards. I have a few near me but am under the weather today.

 

[Bigmd]

Ok guys was able to find online from the part numbers hilife gave. It brought me to a intake parts list and it had the part number . Thanks again . Tim I just watched your supercharger install vid and it made me go look for bracket on my truck .