Hi everyone,
I've done a fair amount of research on the power steering pump whine issue and am curious if anyone can help point me in the right direction for my particular situation.
I followed the DIYs -- flush the fluid until clean with new ATF, pull the reservoir off and clean the screen, neither solved the issue.
I thought ok, I might as well replace the pump. At 260k miles maybe the original unit has had enough. So I just installed a brand new OEM pump and the whine persists. I made sure to flush the system again before installation so the new pump had fresh fluid, and the level is correct and consistent for both cold and hot ranges. The noise is clearly the PS pump as the groaning noise intensifies as you turn the wheel left to right.
I haven't come across anyone else that's had the issue after a pump replacement, so I'm curious what would the next steps be? I'm using Valvoline MERCON V fluid (Dextron III compatible) maybe try a different ATF? If I remember others have suggested a rack replacement but I don't see how that would be necessary unless there are orifices of some kind that are blocked in the rack/lines. Seems unlikely.
Please let me know what you guys think, thanks!
I've done a fair amount of research on the power steering pump whine issue and am curious if anyone can help point me in the right direction for my particular situation.
I followed the DIYs -- flush the fluid until clean with new ATF, pull the reservoir off and clean the screen, neither solved the issue.
I thought ok, I might as well replace the pump. At 260k miles maybe the original unit has had enough. So I just installed a brand new OEM pump and the whine persists. I made sure to flush the system again before installation so the new pump had fresh fluid, and the level is correct and consistent for both cold and hot ranges. The noise is clearly the PS pump as the groaning noise intensifies as you turn the wheel left to right.
I haven't come across anyone else that's had the issue after a pump replacement, so I'm curious what would the next steps be? I'm using Valvoline MERCON V fluid (Dextron III compatible) maybe try a different ATF? If I remember others have suggested a rack replacement but I don't see how that would be necessary unless there are orifices of some kind that are blocked in the rack/lines. Seems unlikely.
Please let me know what you guys think, thanks!