HB 4X4
New member
Thanks Mark! I appreciate it. :bigok:
New project
- Thread starter HB 4X4
- Start date
Thanks Mark! I appreciate it. :bigok:
HB 4X4
New member
The SAW's were starting to get mushy and close to being maxed out for lift so rather than putting $$ into them to get stiffer coils and get them re-valved, I opted to get new coilovers. I went with King remote resi's in the front, and will get King resi's for the rear in the near future. I had these made with stiffer coils to handle to added weight of the bumper, winch, and dual battery.
HB 4X4
New member
Hopefully that will all get sorted out on Tuesday.
My Icons are laying downstairs, so when I eventually order the Kings for the rear it'll be time for another wrenching session. Of course it'll only take us a fraction of the time as the front. I think I am going to wait and do the springs/shocks at the same time though.
BlairB
New member
So I take it that you are doing the rear shocks soon then?
HB 4X4
New member
Order of operation (so to speak):
1. Winch this week
2. Rear shocks
3. Dual battery and fridge
BlairB
New member
Is this a 4 day timeframe or 3 months :lmao:
HB 4X4
New member
Winch will most likely be this week. The rear shocks have no planned date yet, but perhaps the beginning of September. The fridge and dual battery might still be a little while.
HB 4X4
New member
Thanks guys! :guitar2:
I don't shoot Canon. The only thing Canon I have is my camera bag and that's only so people don't steal my gear.
Just kidding. I shoot Nikon though, and the next lens I have on my list is a 70-200 f/2.8 and a 1.7x teleconverter.
My gear right now is a D300 with a battery grip, 18-200, 12-24 f/4, and a few other things so I need a good telephoto.
HB 4X4
New member
Thanks, I appreciate it!
HB 4X4
New member
Update:
New remote resi brackets fitted:
Warn M8000 winch installed:
About 10 minutes after UPS dropped it off I had the steel cable off already:
I didn't have anyone to help me. At first I thought it would be near impossible because you have to hold the winch on it's side (the bottom of the winch mounts facing forward) while also holding the nut on the inside; all while trying to tighten the bolt.
But that was nothing a strap and a clove hitch couldn't solve:
Winch mounted:
Synthetic line and solenoid mounted. The solenoid is mounted to the left but it got cut out:
Everything installed and wired:
New remote resi brackets fitted:
Warn M8000 winch installed:
About 10 minutes after UPS dropped it off I had the steel cable off already:
I didn't have anyone to help me. At first I thought it would be near impossible because you have to hold the winch on it's side (the bottom of the winch mounts facing forward) while also holding the nut on the inside; all while trying to tighten the bolt.
But that was nothing a strap and a clove hitch couldn't solve:
Winch mounted:
Synthetic line and solenoid mounted. The solenoid is mounted to the left but it got cut out:
Everything installed and wired:
paraordnance
New member
sweet! Im thinking about shrockworks bumper too. I just so tired of people bumping in to my bumper in parking lots. It was replaced once and got it painted twice already, I need another paintjob because someone scratched it again :redbrick:
HB 4X4
New member
imp:
HB 4X4
New member
Yes sir. Wait 'til you see what I do over the course of the next month or so. :cheers:
: