New to the forum

[motocrf450176]

Just wanted to say hi and thanks. I've gathered alot of useful info before i decided to lift my truck.

 

[rook]

Just wanted to say hi and thanks. I've gathered alot of useful info before i decided to lift my truck.

welcome.

post some pics when you get the 285's mounted.

 

[motocrf450176]

I will, i havent decided what brand i'm going with yet. Most likely Nittos or Toyos. There will also be a body-lift in the future as well.

 

[CJ3Flyr]

Welcome! Sounds like you've got quite a nice rig under development :bigok:

:cheers:

 

[YotaConvert]

Welcome aboard! I agree 100%, if you can't find it in a search someone is always willing to help you out...I look forward to the pix as well...

 

[motocrf450176]

Thanks, i still have alot of work ahead of me. Below is the lift installed with stock wheels. Gotta get some tires and get the FJ wheels on soon!

 

[rook]

Thanks, i still have alot of work ahead of me. Below is the lift installed with stock wheels. Gotta get some tires and get the FJ wheels on soon!

looks good, but must be hard to fit in such a small truck

 

[motocrf450176]

Ya i was having a hard time uploading. Never could get the avatar to work. I will get everything straightened out later.

 

[motocrf450176]

ok, here's the finished lift. 5 hours from start to finish including lunch and cleaning up.

 

[motocrf450176]

Got the FJ wheels and 265/70/17 Toyo Open Countrys mounted. Anyone running FJ or Sequoia wheels also running Spidertrax spacers??? Even with the lift I still have some rubbing in the front.

 

[YotaConvert]

Looks wicked! any thoughts on removing your boards?

 

[motocrf450176]

Thanks! Ya, i will pull them off soon. I have a RB 1.5" bodylift on order as we speak, actually its been a week now. Hopefully it will ship out next week and i could install it next weekend. I plan on pulling the running boards off then. Any idea if anyone is running fj or sequoia wheels and spidertrax spacers??

 

[YotaConvert]

not sure bud...do a quick search or wait for someone to chime in...

 

[rook]

Thanks! Ya, i will pull them off soon. I have a RB 1.5" bodylift on order as we speak, actually its been a week now. Hopefully it will ship out next week and i could install it next weekend. I plan on pulling the running boards off then. Any idea if anyone is running fj or sequoia wheels and spidertrax spacers??

search for Loner, I believe he has fj wheels with spacers.

 

[EH007]

I have the same FJ wheels with a 1" spacer lift up front and 265/65/17 tires and I don't have any rub at all.

Others have stock suspension with 265/70/17 and don't rub. So I'm not sure why you would have any rub with 70's on the FJ wheels and a lift. Where is it rubbing?

 

[motocrf450176]

Its rubbing on the front fender liner, the part that bumps out, the part everyone trims off. I may just end up doing some trimming, the rear mud flaps are already trimmed off so the front shouldnt take much time at all.