Aceverette
New member
I have a 2007 sport edition and im wanting to get nitto trail grapplers on my stock rims with no lift can i make it work?
if so how much rub with they cause
if so how much rub with they cause
Nitto Trail Grapplers
- Thread starter Aceverette
- Start date
Register to hide this ad
Autbond
New member
I would suggest at least getting a spacer lift? The smallest they make is a 265/70R17, that is a little under a 32" tire. You would need to do at least a 2" spacer but probably a 3", there are plenty of kits out there that are 3/2. You would have to do a body mount chop and a lot of trimming to get those to fit without a lift.
texastony
New member
I added Nitto crosstek to mine ,on factory rims 265/60-18, I know it is not the Grapplers but maybe another option for you
http://www.toyota-4runner.org/4th-gen-t4rs/82494-searching-tires.html
http://www.toyota-4runner.org/4th-gen-t4rs/82494-searching-tires.html
Aceverette
New member
so you have trail grapplers and your on stock everything and they work?
Daisy 53
New member
mysticz
Member
I think you have Terra Grapplers, since they do not make that size for the Trail Grapplers. The only closes size for the Trail would be LT265/70R17 and you will need a lift for Trail Grapplers due to it being a MT tire and not a AT.
Also the Trail Grappler is a heavier tire so expect some lost in gas mileage. A 265/70R17 is a 32 inch tire with a 19 inch tread width and 265/65R17 is 30.5 inch tire with a 12 inch tread width.
Nitto Tire - High Performance Tires for Car and Truck Enthusiasts
