Oil filter wrench for 5th Gen

[enolasfinest]

Anyone know if this will for the 5th Gen 4Runners? I know it fits the 5.7L Tundras. The wrench is advertised as 64mm.

https://www.amazon.com/Assenmacher-Specialty-Tools-TOY-640/dp/B0015PK3AG

Thanks!



Sent from my iPhone using Tapatalk

 

[Steve_53]

That one will indeed work, however, the Movix one is a whole lot better on the current plastic filter housings.

https://www.amazon.com/Motivx-Tools...spons&keywords=toyota+oil+filter+wrench&psc=1

 

[enolasfinest]

That one will indeed work, however, the Movix one is a whole lot better on the current plastic filter housings.



https://www.amazon.com/Motivx-Tools...spons&keywords=toyota+oil+filter+wrench&psc=1

Thanks! I already own this one for my Tundra, and so I'll give it a shot. Thanks again.




Sent from my iPhone using Tapatalk

 

[Hybryd40]

I use the one you have. Its for my wife's Lexus IS. Works fine on my truck also

 

[willo]

Nice, I went to change oil today and the crappy filter socket I used last time kept slipping.
I ended up having to leave the filter in while I get a better wrench. :/
I went for the one with the filter drain tool as well - looking forward to low mess changes!

 

[YelloLab]

That one will indeed work, however, the Movix one is a whole lot better on the current plastic filter housings.

https://www.amazon.com/Motivx-Tools...spons&keywords=toyota+oil+filter+wrench&psc=1

I have this one and it's great!

 

[TrkyMfns]

I have both. Get the Motive. The other one got stuck to the filter housing and was nearly impossible to remove afterwards. I thought I was going to have to next day another filter housing.

 

[SlickTRD]

I did an oil change this weekend and thought I misplaced my Motive tool. I was freaking out a little because I consider this tool a must own - it is that good.

 

[QwikKotaTx]

I have both. Get the Motive. The other one got stuck to the filter housing and was nearly impossible to remove afterwards. I thought I was going to have to next day another filter housing.

I believe I have the OEM tool (purchased at dealer at least) and it can get slightly stuck but nothing a light tap doesn't remedy. Expensive for an oil filter tool but it works.

 

[Kunimatsu]

That one will indeed work, however, the Movix one is a whole lot better on the current plastic filter housings.

https://www.amazon.com/Motivx-Tools...spons&keywords=toyota+oil+filter+wrench&psc=1

Looks like I’m going to have to buy one of these. Thanks for the link.

 

[Rapid_Amble]

I have the Motivx tool also, it definitely works great.