OME-FJBP51 experience?

[jpostlethwaite]

Hey fellas. I've been looking for someone with experience with this suspension kit from OME. I would appreciate any feedback with experience using this kit on a 5th gen 4Runner. I understand internal bypass I just want some impressions from anyone that might have used them.

Old Man Emu Suspension Kit 2.5-3" Lift Kit For 10+ FJ Cruiser & 4Runner W/ BP-51

 

[3wbdriver]

Really? It's at the bottom of page 1.......

http://www.toyota-4runner.org/5th-gen-t4rs/211008-ome-bp-51-suspension-system-anyone-yet.html

 

[codyHTX]

search, use google, or just look at the thread on the first pg of the subforum with BP51 in the title

 

[jpostlethwaite]

Thank you for the quick responses and link to the thread that I had already read. While that thread does talk about the components of the lift, as I originally stated, I am looking for actual experiences from anyone that has these components installed on their truck. There is one mention of the separate compression and rebound settings being "nice" and one picture that was the most "experience" info I saw.

 

[MTN4RNR]

Thank you for the quick responses and link to the thread that I had already read. While that thread does talk about the components of the lift, as I originally stated, I am looking for actual experiences from anyone that has these components installed on their truck. There is one mention of the separate compression and rebound settings being "nice" and one picture that was the most "experience" info I saw.

From the thread that you read:

Just as an FYI, I spoke with ARB's Washington sales staff regarding the BP-51 system last week. According to them, the specific system for the 5th gen 4Runner has not been released yet. The only similar one that has been is the FJ which has different internal valving.

No experience with the T4R specific model because they haven't been released yet. Look for that late next month.

 

[jpostlethwaite]

Thank you MTN4RNR! Your two posts in that thread are the most informative. I must admit, by pg. 4 I was mostly skimming since almost all of the posts were in relation to the group buy.

 

[MTN4RNR]

Thank you MTN4RNR! Your two posts in that thread are the most informative. I must admit, by pg. 4 I was mostly skimming since almost all of the posts were in relation to the group buy.

It happens haha. Sometimes I skip a few pages at a time to see if a thread is still on one BS subject before coming back to point later on...

Good luck with the research, the BP-51 should be killer when it's released!

 

[codyHTX]

Thank you for the quick responses and link to the thread that I had already read. While that thread does talk about the components of the lift, as I originally stated, I am looking for actual experiences from anyone that has these components installed on their truck. There is one mention of the separate compression and rebound settings being "nice" and one picture that was the most "experience" info I saw.

then ask the question in the existing thread

 

[ST1FLER]

I am looking for actual experiences from anyone that has these components installed on their truck.

Email Bernie Sanders... he seems to be in fairytale land too.

 

[jpostlethwaite]

Thank you for your help ST1FLER! Those are the comments new members keep coming back for.:cheer2:

 

[ST1FLER]

Thank you for your help ST1FLER! Those are the comments new members keep coming back for.:cheer2:

anytime, glad I could help