PART OUT- 3rd gen, 2000 sr5, auto, 4x4, Mesa, AZ plus!

[barinaz]

I have completely dismantled a 2000 SR5 4x4 Auto, factory elocker, 4.30 ratio. White with Moonmist/ gray combo interior.

I now need to move the parts!

The rig had 143.5k miles and lived in AZ all of its life. It was purchased from its original owner.

The only major body part left is the white liftgate w/ spoiler, etc.: $700

Front and rear w/ factory elocker (rear is COMPLETE axle assembly w/cables, harness, drums, etc... will also toss in the factory switch!): $800

Full Frame: $1200, OBO
Fuel tank: $40
Auto trans w/ transfer case (GOOD FOR '99-'00 rigs ONLY): $500

Steering airbag: $80
Passenger airbag: $80
Steering wheel clockspring for airbag: $50
OEM 16" wheels w/ caps: $200/ set (2 sets, one with 50% tread tires)

I have all four interior door panels: $175/ set OR $65/ each.
Rear seats: $125/ OBO
Body wiring harness: $250
Engine wiring harness: $175
Engine main fuse block: $150
Skid panels: Front $60; Fuel tank $80... Pair $120

Front dash pad, some cracking/ scratches: $100 (preferred pickup, but will ship if you wish to pay...)

I have the Radio bezel (tombstone) for this, plus a few more... one cannibalized, but the rest have good ash trays, cup holders, vents, etc. $100-$50 depending on condition. I will update THIS as I can...

Sensors, connectors, body wiring harness, OEM hitch, OEM rear bumper parts, OEM running boards.... AND MORE.

Lots more... building a hosted page with items available to be updated. Also some stuff from my '96 swapped out and others from hunting in PHX u-pull-it yards.

Prices are for local pick up, but I can calc. shipping. Please PM. Please include your email address for specific photos.

I am working in TX rebuilding after Harvey in Houston and can arrange some pickups there. Also, this will affect some of my ship times/ pickup due to travel between AZ and TX. I can keep anyone interested via PM for status.

SOLD LIST
'00 Trans cooler lines, dipstick and tube-- SOLD
'96 3.4l block and heads-- SOLD
Front CVs- SOLD
Axle shafts: SOLD!
Steering wheel w/o airbag: SOLD!
Door Armrests: SOLD!



Thank you for looking.

 

[MCKAY1123]

PM sent

 

[hdoggie24]

pm sent

 

[barinaz]

Got your PMs

Replied back to sent PMs. Keep 'em coming!

:thanks:

 

[Mchaz]

Do you have a non-cracked factory air intake/filter box and tube up to the throttle body for the 5vz? If so, LMK the price shipped to 73120.

Sent from my RS988 using Tapatalk

 

[tx_shooter]

Have a pic of the steering wheel? If it is in good shape I could be a buyer. I am also interested in buying just the rear 3rd member if/ when you are willing to sell it parted.

 

[zjarcher]

Im in AZ as well and interested in that rear end.

Brandon

 

[zjarcher]

Actually interested in front and rear- noticed mine are 4.10 and need those 4.30s.

 

[barinaz]

Good afternoon all! In AZ plus a local trip for a newborn arrival! I am working on requested items for specific pics with pricing/ shipping. PMs sent!

BAR

 

[barinaz]

Would like to add that I have the block form my '96 available to dismantle or use for a core. I pulled it with a suspected Head gasket leak starting, but no KNOWN internal damage when inspected by my local mechanic before the heart transplant.

Engine was at 336k miles when removed. It has been kept covered from AZ weather.

Any interest? I would rather not just scrap. $400 for whole thing or will part out individual components...

 

[zwalker16]

Pmd you!

 

[barinaz]

More pics for now...

Adding requested pics until on hosted page, will remove and then add hyper link. I have too many to host here!

 

[barinaz]

Pics cont'd...

Adding requested pics until on hosted page, will remove and then add hyper link. I have too many to host here! PART 2!

 

[barinaz]

Current inquiries... follow up, plz

Could y'all PM email addresses to email pics to you... just learned that I cannot attach through T4R... my apologies.

 

[barinaz]

Hosted page added for this part out

I am still learning how to link correctly to 3rd party hosted images, but I do have a private page up.

runnerparts - Just Needs Paint

Mods, please correct me, if needed.

Thank you.

 

[Bearcat5150]

what style 16" wheels and do you have a good charcoal canister?

 

[mehdi_619]

Still have the wheels? Are they the 5 star 16s?

 

[Chrisiwannagofast]

I sent a PM, but I'm not sure if it went through... Interested in the cylinder heads off of your 96 engine. Please shoot me an email at [email protected] if you didn't get my PM. Thanks!

 

[barinaz]

Chris,

Thanks.

BAR

 

[barinaz]

I still have the wheels. They ARE NOT the 5-star... they are the "split peace sign" 16". I do have some of the "snowflake" 16" off of the '14 Taco, though. I got extras of these when swapping to the 231mm Tundra bake upgrade...

I will be adding pics to my site listed on the first page, or PM w/ email for direct pics, plz.