I'll take them both. Not sure why I can't be Pm'd. Paypal? $28 work to cover bubble mailer envelope and shiping to 32444? Contact me at [email protected] since PM isnt working for me. Thanks, Doug :bigok:
-
If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.
- Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
-
All Threads must contain the following information
- What is for sale/trade (model, specs, etc.)
- Condition
- Price/What you want to trade for
- Location of item
- At least one picture of the item for sale or for trade
- No "Feeler" Threads - Its either for sale or it isn't.
- Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
- Threads not complying with the rules will be deleted without notice.
Parting Out 2003 Sport
- Thread starter V8Man
- Start date
I'll take them both. Not sure why I can't be Pm'd. Paypal? $28 work to cover bubble mailer envelope and shiping to 32444? Contact me at [email protected] since PM isnt working for me. Thanks, Doug :bigok:
Woodsblaster86
New member
V8man do you have the passenger rear axle shaft still ?
V8Man
Member
Axle
The passenger side axle tube is bent, the axle it's self may be good. It would be your call if you still want it or not. I would hate to go to the trouble of pulling it without telling beforehand that the tire on that side was hit hard enough to bend the tube. Let me know.
The passenger side axle tube is bent, the axle it's self may be good. It would be your call if you still want it or not. I would hate to go to the trouble of pulling it without telling beforehand that the tire on that side was hit hard enough to bend the tube. Let me know.
Woodsblaster86
New member
I'm an idiot I don't know why I specified passenger we need the drivers side how does it look ? And it's not much work at all to pull one out I did this morning in 20 min and I've never done anything like this Let me know thanks !
Woodsblaster86
New member
Interested in the drivers side with the disc shield and all on it is it in good shape ? Thanks
Pm'd you V8Man
homelturner
New member
2003 4runner
I am interested in the differential assembly and passenger side rear wheel molding
I am interested in the differential assembly and passenger side rear wheel molding
V8Man
Member
[MENTION=259239]homelturner[/MENTION]
I still have the wheel molding and the rear diff. The diff is a booger to pull with a bent axle. I can pull it but shipping and cost it may be cheaper to buy it locally. [MENTION=259604]CAPS1[/MENTION]
Inner fender plastic is torn or I already used it on #3 & #4. They are available on Ebay brand new.
I still have the wheel molding and the rear diff. The diff is a booger to pull with a bent axle. I can pull it but shipping and cost it may be cheaper to buy it locally. [MENTION=259604]CAPS1[/MENTION]
Inner fender plastic is torn or I already used it on #3 & #4. They are available on Ebay brand new.
A/V1
New member
Holy crap! This was brought back from the depths!
However... I didn't even notice before that you replied about the glovebox door (and the lock being mucked up). If you still have the door, can you send some pics to me at [email protected]? I would replace the lock anyway. I just want to see the condition of the door.
Another part I'm interested in, if you still have it and it's working correctly, is the shift assembly.
Please let me know if you have either, and how much shipped to 75068, Little Elm Texas.
Thanks man!
Brad
However... I didn't even notice before that you replied about the glovebox door (and the lock being mucked up). If you still have the door, can you send some pics to me at [email protected]? I would replace the lock anyway. I just want to see the condition of the door.
Another part I'm interested in, if you still have it and it's working correctly, is the shift assembly.
Please let me know if you have either, and how much shipped to 75068, Little Elm Texas.
Thanks man!
Brad
Attachments
Last edited:
A/V1
New member
Thanks V8Man. I wish I would have paid attention and caught what you had written about the glovebox the first time Damn! :doh:
As for the shifter... Is there any difference between the shifter in a V6 model & a shifter in a V8 model? I have no idea. I would need the V8 if there is a difference. I'll have to try to find out.
Thanks for the response!
homelturner
New member
I do need the 2003 rear wheel flare short piece in the top front of wheel. I also ended up with a rear axle for 2003 4.7 automatic, I only needed the differential. Would like to sell axle assembly. 870-761-2270 contact
Last edited:
V8Man
Member
What side? Passenger or driver? The problem with these old plastic pieces is they may break the plastic where the little clips attach to them. Let me know which side.
V8Man
Member
[MENTION=297664]bcam96[/MENTION]
Your signature doesn't show where you are. If you would come here I would let you have it for free if you removed it. For me to remove it you would being paying for my time. Time to cut it. Time to box and get a shipping estimation. Then send you a few emails. I have been burned before with first time posters and never hear back from them. Let's start with how much are willing to pay to have the floor pan delivered to your door? And a picture how you want it cut would be helpful.
Your signature doesn't show where you are. If you would come here I would let you have it for free if you removed it. For me to remove it you would being paying for my time. Time to cut it. Time to box and get a shipping estimation. Then send you a few emails. I have been burned before with first time posters and never hear back from them. Let's start with how much are willing to pay to have the floor pan delivered to your door? And a picture how you want it cut would be helpful.
