Pics of RAY's TE37 on a 5th Gen TE

[DesertCanyons]

SCS SR8 17x18.5 wheels

[MENTION=115572]DesertCanyons[/MENTION] , Im sure the weight differences on everything you mentioned (rim/tire combinations) are not that significant. I bought the TE37's because I liked them. But if you are interested in a set of wheels that are a fraction of the price, that looks amazing!, I have a brand new set for sale here :

http://www.toyota-4runner.org/sale-suspension-wheels-tires/196613-fs-5th-gen-scs-sr8-wheels-%2Abrand-new-box%2A-%24950-s-socal.html

Thanks for the reply and link to your tires. They look great. I sent you a PM.

 

[Magnetic4R]

Seems stock height? Do you have any problem with tires rubbing or turning radius steering locked, rubbing? I appreciate any info. Planning to buy tires but cant decide 275/65/18 or 285/65/18.

I would go 285/65. Currently on 285/65 and just added the Spidertraxx 1.25" spacers on the same wheels. Rubbing on front liner and trim about 1/4" at the lower plastic trim of the front bumper since I have the limited and the bumper sits lower compare to the trail and sr.5

 

[BR8KNNX]

I would go 285/65. Currently on 285/65 and just added the Spidertraxx 1.25" spacers on the same wheels. Rubbing on front liner and trim about 1/4" at the lower plastic trim of the front bumper since I have the limited and the bumper sits lower compare to the trail and sr.5

1.75" up front and rear are stock springs. Bilstein 5100's all around. Very slight rubbing on the front wheel-well at full lock on the right side while going up a driveway.

Could you show a picture where it rubs and where it needs to be modified? I appreciated.

 

[eddie333]

So sweet...

All I wanted was bronze rims for my 4Runner but the price tag on those was too steep so a settled for a cheaper bronze wheel. So tired of seeing every suv and truck with black rims. Keep it unique!

 

[Magnetic4R]

Could you show a picture where it rubs and where it needs to be modified? I appreciated.

Here u go

 

[BR8KNNX]

Here u go

Thank you so much for going out of your way to post a picture. I now understand what you mean using 285/65 tires up front. Do you think it will be an issue on the SR5 model bumper on the lower pcs that you trimmed off? Do you think I would have to cut 1/4" or trim lower bumper off on the SR5 bumper? or just push back the fender liner with a heat gun will do the trick?

 

[BR8KNNX]

They are One piece Forged, and wheels are pretty light. The Volk TE37 Large PCD's are made with extra strength and durability for offroad vehicles.

How much were those wheels? If you dont mind me asking. Thank You

 

[Magnetic4R]

Thank you so much for going out of your way to post a picture. I now understand what you mean using 285/65 tires up front. Do you think it will be an issue on the SR5 model bumper on the lower pcs that you trimmed off? Do you think I would have to cut 1/4" or trim lower bumper off on the SR5 bumper? or just push back the fender liner with a heat gun will do the trick?

Also remember, I'm running the 1.25" spacers. Without it, I have a lot more clearance. I believe the SR5 has more clearance since it sits higher then the limited.

How much were those wheels? If you dont mind me asking. Thank You

They go for about $3700 retail

 

[stoked51]

They go for about $3700 retail

Yup, what he said

 

[LandCruiser]

Seems stock height? Do you have any problem with tires rubbing or turning radius steering locked, rubbing? I appreciate any info. Planning to buy tires but cant decide 275/65/18 or 285/65/18.

I can tell just by looking.

Much worse things will happen off road.

The 4Runner has huge articulation, but not much room to stuff tires, especially when upsized without an extreme lift.

 

[trdsport253]

TE's on a TE. I'm drooling. Looks bad ass love what you did with your truck.

 

[Pressure_Drop]

 

[a_double]

Who's on 295 or 305?

I'm interested in running 305/65 on the 18x9 +0 spec. Anybody out there running this setup? Thanks in advance.

 

[a_double]

Is this user...

ShrockWorks 4x4 Products on Instagram: “#Repost @nittotire ・・・ Where are you exploring this weekend? Let us know below! #GrapplerAdventure ⠀ ⠀ #NittoTire | #RidgeGrappler |…”

on this forum?

I'm interested in this look and what it takes to make it work.

 

[rheosibal]

Looks like @chivas_sotelo on IG, I don't think he's on here.

BTW, those wheels are from RRW, not Rays

 

[a_double]

Looks like @chivas_sotelo on IG, I don't think he's on here.

BTW, those wheels are from RRW, not Rays

Ah OK, thank you for clarifying. Let me try to dig up specs on that wheel.

 

[Ryan at Eibach]

New 17" TE's on my rig. Had the 18's previously.

 

[a_double]

^^^ looks good.

 

[MGordo]

Another japanese option was just released.. (well teased) Will come in cheaper than the TEs, but similar look and good quality. (Same manufacturer) Rays Gram Lights 57DR

Sizes and colors not released yet.

 

[a_double]

Looks like @chivas_sotelo on IG, I don't think he's on here.

BTW, those wheels are from RRW, not Rays

Are those RRW wheels discontinue? I couldn't find them online. Do you know the specs of those wheels? TIA.