[pictures]...TSX Retrofit On Lexus SC300

icantsee

Banned
My friend Gilbert (Lilboi) from MY.IS & Club Lexus & I installed TSX Projectors in his brother's 1995 Lexus SC300.

Stock
IMG_2622.jpg~original


TSX Projectors
IMG_2692.jpg~original


Can't even tell if anything was done...appears factory.
 
Last edited:
Register to hide this ad
HID vs Halogen
http://www.toyota-4runner.org/showthread.php?s=&threadid=23833

via Uneek

That was him & I.

Uneek - XenonDepot H11 4300k Xtreme HID Kit
icantsee - Stock halogens

*Both trucks - squirrel finder NOT eliminated.*

HID Conversion & Xenon Depot
http://www.toyota-4runner.org/showthread.php?s=&threadid=32555&perpage=15&pagenumber=2

via icantsee

*squirrel finders NOT eliminated yet in these pictures - you'll see the glare*

How To Aim The Headlights On An 2007?
http://www.toyota-4runner.org/showthread.php?s=&threadid=41882

via icantsee

LS430 Retrofit On 2006 4Runner
http://www.toyota-4runner.org/showthread.php?s=&threadid=32679

via 1MZ-V8

TSX Retro Soon!
http://www.toyota-4runner.org/4th-gen-t4rs/30486-tsx-retro-soon.html

TSX Retrofit On 2007 4Runner
http://www.toyota-4runner.org/showthread.php?s=&threadid=30721

TSX Retro Update Pictures
http://www.toyota-4runner.org/showthread.php?s=&threadid=31066

S2000 Retrofit On 2007 4Runner
http://www.toyota-4runner.org/showthread.php?s=&threadid=37229

via lawwailok

TSX Retrofit On 2004 4Runner HID Teaser
http://www.toyota-4runner.org/4th-gen-t4rs/47504-2004-t4r-hid-retrofit-teaser.html

via paraordnance

LightWerkz
http://shop.lightwerkz.net/index.php
 
Last edited:
Damn, KC, you're like the forum lighting expert! :)

I love my TSX HIDs...but i am liking the LS430 projectors even more! Wow!!
 
That looks Amazing! But i have a question, how did yall get the optics (lines built into the headlamp lense to direct light) off the lenses so that the projectoor has an un-obstructed light path? Thanks so much for any advice given.
 
That looks Amazing! But i have a question, how did yall get the optics (lines built into the headlamp lense to direct light) off the lenses so that the projectoor has an un-obstructed light path? Thanks so much for any advice given.

Sandpaper and elbow grease.

Start with a courser paper to knock down the ridges, then move to finer grits until the surface is smooth. Finally, you'll need rubbing compound and plastic polish to clear the lenses.
 

Members online

No members online now.

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top