Plastic "splash guards" pieces missing from Front/Driver wheel well

[Zuke]

Digging up an old thread but thank you! My liners are gone and I think it caused my upper O2 sensors to fail earlier. Also someone is selling this PDF on ebay for $6....

 

[Slowgoat]

Digging up an old thread but thank you! My liners are gone and I think it caused my upper O2 sensors to fail earlier. Also someone is selling this PDF on ebay for $6....

Haha!

Well that's capitalism!!

 

[CXS]

I bought a set from someone on here that was making them. They're great and haven't budged since I put them on. The key, in my opinion, is attaching them with a nut & bolt rather then those silly little plastic pins.

 

[Elan_]

https://www.radrubberdesign.com/store.html

This guy sells them for $50.

 

[Slowgoat]

https://www.radrubberdesign.com/store.html

This guy sells them for $50.

Wow.

That's a great idea too. He is going to be rich.

I paid about $15 bucks for the rubber I cut mine from, and someone on T4R.org was nice enough to send me the liner links for free. So I pay it forward on that thread I started that I mentioned above.

 

[morphious]

Sorry, would never buy from somebody who doesn't have a polished website. With materials from Home Depot and new clips online, I spent about $15 for all 4 on my 4runner. I don't like that there are no picture links on that site.

 

[vastano]

for the guys making their own splash guards, what are you using to fasten them now? I dont think I have any OEM clips left.

 

[Slowgoat]

for the guys making their own splash guards, what are you using to fasten them now? I dont think I have any OEM clips left.

See my thread here, near the end.

Post #14 and #15:

http://www.toyota-4runner.org/4th-gen-t4rs/198245-pdfs-4th-gen-fender-liners.html

I used plastic screw clips, and hammered them in. That size is solid, but I doubt I'd do it again.

This Last time I pulled everything apart I used heavy duty zip ties with no problems.

 

[morphious]

[MENTION=145842]vastano[/MENTION]

https://www.clipsandfasteners.com/Toyota_Dash_Fender_Apron_Retainers_90467_10186_p/a21634.htm

 

[SoSoRunner]

For those making the home made sets make me an extra set, I'll paypal you lol...completely 100% serious! My work doesn't have 11x17 paper so I can't print out the stencils too lazy to tape papers together hahaha!

 

[Inv4drZm]

For those making the home made sets make me an extra set, I'll paypal you lol...completely 100% serious!

I have some material left over... let me check how much.

 

[Zuke]

Here is what I used. Works good and plenty of extra.
https://www.amazon.com/Black-Plastic-Rivets-Fastener-Clips/dp/B00WW4R9LA

 

[Gen4SR5]

For those making the home made sets make me an extra set, I'll paypal you lol...completely 100% serious! My work doesn't have 11x17 paper so I can't print out the stencils too lazy to tape papers together hahaha!

I'm in the same boat. If someone can make a set for me please PM me and we can work something out would be even better if you're in SoCal and I can pick them up with a nice cold 6 pack of beer....

 

[matt922]

Just a bit of learning from my experience.... 1/8" thick is a little thicker than necessary and if you managed to save the old clips, it is too thick to work with them.

I bought a sheet of 1/8" closed cell neoprene on eBay for like $15 shipped. Would definitely go with 1/16" if there is a "next time".

 

[46runner]

Templates you can print to 8.5x11 paper

Templates you can print to 8.5x11 paper:

http://www.toyota-4runner.org/4th-gen-t4rs/198245-pdfs-4th-gen-fender-liners-2.html#post2804657

 

[Seymore Butts]

Mine is mostly missing from the right front side. What happens to these things? There is no sign of impact.

 

[Slowgoat]

Mine is mostly missing from the right front side. What happens to these things? There is no sign of impact.

Mine disintegrated.

 

[Miranthis]

Isn't this the same thing you guys are talkign about? I priced teh dealer ones and i was much hight than these.

https://pure4runner.com/rad-rubber-design-c-126/4runner-engine-splash-guards-4th-gen-20032009-p-2761.html

Jeff in KC

 

[AuSeeker]

Isn't this the same thing you guys are talkign about? I priced teh dealer ones and i was much hight than these.

https://pure4runner.com/rad-rubber-design-c-126/4runner-engine-splash-guards-4th-gen-20032009-p-2761.html

Jeff in KC

Those are better than the OEM which are thinner than these aftermarket splash guards, also the OEM don't come with the fasteners.

 

[rando]

I ordered two sheets of the 1/16" from Grainger. Even though both sheets were stamped with the ordered part number, one of them was quite a bit thicker and refused to work with the factory clips. I tried to thin it down with a Dremel near the holes but in the end ended up just using zip ties for the front pieces that I cut with the thicker sheet. If anyone is doing this, get the 1/16. The PDFs assembled from 8.5x11 prints worked great. Thank you!