Since I lack the skills to build, I have to buy
Dobinson drawer system
Please excuse the mess...
Looks good! What sized is that drawer system? I see they offer a few.
Post pics of your drawer/storage system
- Thread starter e60ral
- Start date
Looks good! What sized is that drawer system? I see they offer a few.
transistor
New member
first time out worked beautifully. breakfast burritos and bloody marys?
that looks perfect. who makes that?
jrob
New member
He did. Sweet custom setup.
Further developing ours all the time.
Boat trip to ATX awhile back
greatape
Senior Member
Yeah, you'd be better off attaching a fridge slide..easy peazy and it would complete it I think..drawers looks solid though
CatahoulaManiac
New member
This has probably been done, but I haven't been able to find it through searching.
I want a platform for the back with just enough height to make it level with the seats folded down, and a little bit of storage space for a rifle and maybe a few blankets.
I measured the drop and came up with ~4 inches, is that about right? I just want to make sure before I get started. Since I'd be sleeping on an air mattress I'm not too worried about it being dead perfect, good enough is fine with me.
I want a platform for the back with just enough height to make it level with the seats folded down, and a little bit of storage space for a rifle and maybe a few blankets.
I measured the drop and came up with ~4 inches, is that about right? I just want to make sure before I get started. Since I'd be sleeping on an air mattress I'm not too worried about it being dead perfect, good enough is fine with me.
Search: "5th gen flat cargo"
Got a little more of my drawer project finished today, got both my side table and sink mounted, I still need to spend some time with a router and some polyurethane. I'm not going to stain the tables or sing mount, just protect them and replace them when they get destroyed. After that the next step is to hook up the water, modify my drop slide so it will house a pull out table similar to the Tembo Tusk unit and then build the fridge divider/barrier.
The groove is on the bottom of the table, lets it clear the slam latch catch.
Sink stores under the table surface on the drivers side drawer. I plan on storing it on top of the fridge barrier once it's built. The painters pole stores between the seat back and the box.
The groove is on the bottom of the table, lets it clear the slam latch catch.
Sink stores under the table surface on the drivers side drawer. I plan on storing it on top of the fridge barrier once it's built. The painters pole stores between the seat back and the box.
Last edited:
Spent Sunday modifying my Easy Slide 150 fridge drop slide to house a pull out table underneath it similar to the Tembo Tusk drop slide.
First I cut the front of the Easy Slide off.
cut a few pieces of 1.5x1.5" 1/8" steel angle
I order a piece of 10 gauge pre cut to 29"x15.25, fits like a glove
Bolted the risers to the side
Bolted two KV 26" slides to the bottom, 1 locking, 1 not.
For the table to I found a Husky took box topper that fit with minimal modification.
Risers painted and table installed
The risers were tapped and the top was bolted on. I wanted to weld this, but the order of operations inhibited welding as it would have kept me from disassembling if needed in the future.
Fridge mounted
Table pulled out
Fridge and table pulled out, fridge still drops down 85% of original drop with table out, but handle does get very close to table.
First I cut the front of the Easy Slide off.
cut a few pieces of 1.5x1.5" 1/8" steel angle
I order a piece of 10 gauge pre cut to 29"x15.25, fits like a glove
Bolted the risers to the side
Bolted two KV 26" slides to the bottom, 1 locking, 1 not.
For the table to I found a Husky took box topper that fit with minimal modification.
Risers painted and table installed
The risers were tapped and the top was bolted on. I wanted to weld this, but the order of operations inhibited welding as it would have kept me from disassembling if needed in the future.
Fridge mounted
Table pulled out
Fridge and table pulled out, fridge still drops down 85% of original drop with table out, but handle does get very close to table.
Last edited:
jrandom
New member
Damn sexy! Nice job on the drawers they look great
:thumb:I really like your fridge slide too. I love how much easier looks when it actuates as opposed to the other drop slides I have seen. What a great idea with the table underneath!
TheAdventurousMind
New member
Here's my single drawer and fridge slider.
T4RZAN
New member
Has anyone heard of a drawer system that can fold open to create a nice sleeping platform with both rear seats folded down?
Something like this poorly drawn picture:
It would be too shallow for drawers. I made a storage box that is very similar to the [MENTION=65614]Antman[/MENTION] storage box and it has lids. Here is the link to his build: Antman Zombie Storage
Has anyone heard of a drawer system that can fold open to create a nice sleeping platform with both rear seats folded down?
Something like this poorly drawn picture:
I thought about that, but by the time i build the drawer there wouldn't have been enough room to clear the interior roof.
There's a guy in the 4 to gen section I think that did this. Created a hinging platform to clear the headliner.
Pics of mine for good measure. Not as pretty as a lot of your guys builds, but they work!
Attachments
Hey guys. New to the Forum. I'm going to be switching from a JKUR to a 2018 TRD PRO. I built a drawer system for my Rubicon and have an ARB 50 qt. Fridge on a slide. Going to be ordering a TRD Pro in the next couple of weeks and have been going back and forth on whether or not to order the sliding rear cargo deck. Is this deck suitable for attaching a drawer system and fridge? Does anyone know of any write-ups by anyone who has done so? Looking forward to building up a Toyota.
Anthocar
New member
What material did you use to cover your build?
Sent from my SM-G950U using Tapatalk
sn_85
Senior Member
I would hate to see what would happen if you actually off-roaded with all those bins/totes and the cooler back there...
What volume is this ARB fridge/freezer?
Since I lack the skills to build, I have to buy
Dobinson drawer system
Please excuse the mess...
