Post your 5th Gen Super White T4r photo

Purchased my 2020 ORP, took it directly to discount and had KO2’s mounted on the Pro wheels.

Life is good.

Nice! I did about the same thing (but a few months later). Wish I just got 285/70 instead of stock size though. Now I'm itching for larger but it's a huge waste to let go of pretty new 265/70 KO2's
 
72749017_10157266835264713_6168115736238620672_n.jpg
 
Upgraded the suspension to Wheeler’s T1 and T12 springs married to Bilstein 5100’s. Changed to 285/70r17 BFG KO2’s load range C on 17x8.5” SCS F5’s.
 

Attachments

  • D15E19D7-770B-4D70-8C34-D6A6537937A4.jpg
    D15E19D7-770B-4D70-8C34-D6A6537937A4.jpg
    139.7 KB · Views: 1,803
Upgraded the suspension to Wheeler’s T1 and T12 springs married to Bilstein 5100’s. Changed to 285/70r17 BFG KO2’s load range C on 17x8.5” SCS F5’s.

Great looking setup!
5100's set to 0 up front? Also what made you choose the T12 springs over the T13's?
 
Great looking setup!
5100's set to 0 up front? Also what made you choose the T12 springs over the T13's?

Thank you. Yes, the 5100’s are set to 0 up front. I went with the T12’s to try to maintain more of the factory rake. When I talked to Wheeler’s they mentioned the T13 would give me more of a leveled look, which is not what I wanted.
 
Last edited:
You and I seem to be on a similar trajectory! We have almost identical starting places. I’m still 100% stock but really like what you have in store

Nice! I've stayed mostly conservative and have been trying to pick stuff that is proven with lots of reviews..

Just wanted to update on some of the things I've ordered or added -

- ARB single compressor along with a Rago Fabrication mounting plate (goes on this week)
- TRD PRO Grill (CS) (installed)
- C4 Fabrication Low Pro Winch Bumper Full Height, w/Gussets (getting delivered next week)
- Extreme LED single row 30" combination light
- Expedition Essentials T4RPAM (goes in next week)

Still deliberating between ordering Slee step sliders or Bud built step sliders but hope to pull the trigger by thanksgiving. Both are highly recommended from folks in the T4R and LC communities so it may just come down to who has a better special over TG..

Also need to install a HAM radio in before Christmas..
 
Nice! I've stayed mostly conservative and have been trying to pick stuff that is proven with lots of reviews..

Just wanted to update on some of the things I've ordered or added -

- ARB single compressor along with a Rago Fabrication mounting plate (goes on this week)
- TRD PRO Grill (CS) (installed)
- C4 Fabrication Low Pro Winch Bumper Full Height, w/Gussets (getting delivered next week)
- Extreme LED single row 30" combination light
- Expedition Essentials T4RPAM (goes in next week)

Still deliberating between ordering Slee step sliders or Bud built step sliders but hope to pull the trigger by thanksgiving. Both are highly recommended from folks in the T4R and LC communities so it may just come down to who has a better special over TG..

Also need to install a HAM radio in before Christmas..

Really great additions. I’m challenging myself with keeping the truck as light as possible whilst still attempting to maximize capability. I’ll have an OME 3” lift and 285s on by the end of the month.

I want to get some trail experience under my belt before making my next moves.
 
Really great additions. I’m challenging myself with keeping the truck as light as possible whilst still attempting to maximize capability. I’ll have an OME 3” lift and 285s on by the end of the month.

I want to get some trail experience under my belt before making my next moves.

That's really smart! I don't intend on a suspension upgrade till perhaps year 2 or three unless I need it earlier. which is unlikely given some of the trips I have planned between then. I figured by that time I'd also have a weight picture clear but I too don't want to add a ton of weight either. Next big thing for me would be a rear bumper and a roof rack..I held off on going to 285's until I had it so I'll keep the 265 KO2's until they wear out..
 
Upgraded the suspension to Wheeler’s T1 and T12 springs married to Bilstein 5100’s. Changed to 285/70r17 BFG KO2’s load range C on 17x8.5” SCS F5’s.
It's perfect. Same wheels I want, too. You're about to have a clone in FL

Sent from my Pixel using Tapatalk
 
If you guys are in Northern Phx area look up Strapt performance. Good buddy of mine and does awesome work. He’s constantly doing installs on 4runners even tho the main biz is for diesel trucks with long travel.

Anyway here’s mine. I haven’t even taken it out yet. I’m still in need of building some thing special for the rear end kdss to have it full capability. Anyone with a kdss truck that has extended travel shocks will for sure need and want this and I’m not even talking about the track bar.

616c6237ff08cde5cb35778dd46a5029.jpg


2698a49396f5aa32b8ff936361005380.jpg


And the Ranger
3a562a102ec29cd416ae7838ada29ce8.jpg



Sent from my iPhone using Tapatalk
 
Picked up a SW 2019 TRD OR a couple of weeks ago. Haven't done a lot to it yet (don't plan on doing a lot for a while) but here are some of the mods/upgrades on it or planned for this weekend:

..:biggrin2:

Truck looks good and the mods will only make it better!! That said, if you haven't already, remove that AutoZone "4wd" badge on the back. It looks cheap and out of place IMO. Anyone that knows these vehicles will know it doesn't belong.
 

Members online

No members online now.

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top