New member here. Due to a fortuitous turn of events I was able to buy an '01 sr5, 4wd, to replace my aging f-150.
I've started on some of the basic stuff--oil/filter, plugs, driveline lube. I finally decided to tackle the power antenna. After reviewing the archives I gathered up my tools and attempted to pull the wheel well liner. I took off all the bolts I could see and nothing happened. This rig has the fender flares and pulling the bolts doesn't seem to have any effect. I pried a little here and there but no luck. I tried to get those diabolical plastic gotchies out, with little success. What am I missing here? What's the trick?
I've started on some of the basic stuff--oil/filter, plugs, driveline lube. I finally decided to tackle the power antenna. After reviewing the archives I gathered up my tools and attempted to pull the wheel well liner. I took off all the bolts I could see and nothing happened. This rig has the fender flares and pulling the bolts doesn't seem to have any effect. I pried a little here and there but no luck. I tried to get those diabolical plastic gotchies out, with little success. What am I missing here? What's the trick?
