“Raptor” amber led mod writup (06-09 grill)

Johns06yota · 2018-09-01T02:21:53+00:00

I had seen several posts on the raptor led mod with a big variety of how people put everything together both with the location on the grill as well as the model year of 4Runner. This writup is for the 06-09 grill as I could not find a writup for those model years. The supplies you will need are as follows: 50 ft of 18 gauge red/black wire (Amazon) Amber led strip 2x (Grand General 77650 Amber Thin Line 6-LED Marker and Clearance Sealed Light) Fuse tap for my application (mini fuse APM) Wire loom (25ft - 1/8 inch Flexo PET Expandable Braided Sleeving – Black – Alex Tech Braided Cable Sleeve) Switch (Cllena Toyota Blue LED Push Switch with Connector Wire Kit Laser ( Driving Lights) Useful tools: Soldering iron Heat shrink tubing Tessa tape Things to note: I had seen this mod where people had tied it to either the daytime running lights or marker lights for night time but I didn’t like this option. I wanted to be able to use it whenever the car was on but still have the ability to turn them off with a factory looking switch. Also the wire loom I used does fit but I think if I didn’t it over I would have gotten 1/4 inch tubing instead. I currently have wired everything up for install and will add more information tomorrow when I put it all together