Rear 1.5" spacer install?

[ryangab]

I just got the Daystar Budget Boost installed the other week and now I ordered the 1.5" rear spacer. I am going to install the rear myself and want to know if there is a good write-up possibly with pics to help make this easier. I have looked around and most write-ups are for the front. Any suggestions for me out there?

 

[chaz]

Daystar (Spacer) installation on 4Runner with XREAS - Toyota 120 Platforms Forum

 

[settytb]

I just did it a week ago. Take off the shocks from the axle...1 bolt each. Take off the pan hard bar from the axle...1 bolt... Then I took off the sway bar end link from the body...2 nuts. Then just have someone stand on the rotor and someone pull out the spring...pretty easy stuff...then button it back up. (the pan hard bar is the one going from driver side of the axle to passenger side of the frame...kinda across it.)

 

[mustangchris66]

I did it my self and it was easy. The hardest part for me was getting the panhard bar re connected.