Rear window nozzle came loose; how to reattach?

[2003V8LTD]

Hi, on our 2009 Limited, yesterday I hit the rear window spritzing button on the stalk, but noticed that neither of the two streams were not hitting the window. Walked around to the back of the car, looked up under the spoiler, and I see that that nozzle unit has come loose.

Would anyone know the proper way to re-secure the ? I could probably just take a long toothpick and put some silicone adhesive up under the nozzle and press it back into place, but I'm not sure that's the right way to do it.

 

[Drcoffee]

Probably need to remove the brake light to get access to the inside spoiler

 

[2003V8LTD]

Probably need to remove the brake light to get access to the inside spoiler

Nope ... that won't work. The nozzle isn't out on the spoiler; rather, it's attached near the top of the tailgate kinda underneath the spoiler. Can't see how in tarnation to get in there!

 

[Drcoffee]

Have you removed the inner panel yet? Once you remove the bolt holding the pull strap, the panel pops off. Start prying the panel off from the bottom.