Replacement couplers for TRD CAI

[bassmacka]

I am looking to replace some degraded couplers ont eh TRD CAI. One is to the throttle body and one is to the intake. If anyone can tell me where to get these it would be appreciated. I believe on is a 4 inch and one is a reducer 3 1/8 to 3 . Not that easy to find.

 

[blackoutt]

Tons of places sell every different size of silicone coupler that you can imagine, just search "silicone coupler" . 4" - 4" is a standard size. 3" - 3.125" is not however. You'll either have to make a 3" - 3" work or an 80mm - 80mm work. Pull the pipes off and measure OD of the pipes carefully, this will be close to the ID of the coupler needed.

 

[bassmacka]

Tons of places sell every different size of silicone coupler that you can imagine, just search "silicone coupler" . 4" - 4" is a standard size. 3" - 3.125" is not however. You'll either have to make a 3" - 3" work or an 80mm - 80mm work. Pull the pipes off and measure OD of the pipes carefully, this will be close to the ID of the coupler needed.

Thanks I ordered a few from amazon and will return what does not fit. Apparently the TRD couplers are total garbage.