count me in lol
#1 hahaha but in all seriousness ive already started saving my funds for these rims...the day they are released i will be ordering a set
SCS SR8 new wheel model
- Thread starter SCSPerformance
- Start date
count me in lol
#1 hahaha but in all seriousness ive already started saving my funds for these rims...the day they are released i will be ordering a set
Ol'Baditude
New member
Offroader5
New member
I like the removable bolts. Allows customization not only with colors/finishes, but also style. I think some stainless button head cap screws would look sweet.
So, check my math for me. I have OEM 17's right now with 1.25" spacers.
OEM wheel = 7" width & +30mm offset (which I believe equates to 5.2" backspace). With the added 1.25" spacers this nets me right at 4" of backspace.
Your 17 = 8.5" width with 4.3" backspace (which should be equal to -10mm offset)
Using this math, adding your wheel in place of my OEM's & spacers, I show that I would net an extra 1/4" or so of backspace bringing the wheel closer to the truck. Am I figuring this right? If I'm right, I can't run these wheels with the Camburg uppers. They require no more than 4" of backspace
So, check my math for me. I have OEM 17's right now with 1.25" spacers.
OEM wheel = 7" width & +30mm offset (which I believe equates to 5.2" backspace). With the added 1.25" spacers this nets me right at 4" of backspace.
Your 17 = 8.5" width with 4.3" backspace (which should be equal to -10mm offset)
Using this math, adding your wheel in place of my OEM's & spacers, I show that I would net an extra 1/4" or so of backspace bringing the wheel closer to the truck. Am I figuring this right? If I'm right, I can't run these wheels with the Camburg uppers. They require no more than 4" of backspace
SCSPerformance
Official Vendor
I like the removable bolts. Allows customization not only with colors/finishes, but also style. I think some stainless button head cap screws would look sweet.
So, check my math for me. I have OEM 17's right now with 1.25" spacers.
OEM wheel = 7" width & +30mm offset (which I believe equates to 5.2" backspace). With the added 1.25" spacers this nets me right at 4" of backspace.
Your 17 = 8.5" width with 4.3" backspace (which should be equal to -10mm offset)
Using this math, adding your wheel in place of my OEM's & spacers, I show that I would net an extra 1/4" or so of backspace bringing the wheel closer to the truck. Am I figuring this right? If I'm right, I can't run these wheels with the Camburg uppers. They require no more than 4" of backspace
John, can you show me the link to the UCA that you're currently using.
Offroader5
New member
Here are the one's I'm running: Camburg Toyota Tacoma Pre/4wd 05-13 1.25 Performance Uniball Upper Arms | Camburg Engineering
Interesting though, when I bought these, Camburg told me max backspace was 4"...but now per their website it says 4.5" :noidea: If it truly is 4.5"...then these wheels would still work.
SCSPerformance
Official Vendor
That was the only one I found too so that's why I asked to make sure. We haven't had anyone reported UCA clearance issues with any of the aftermarket units thus far. Typically, they call for 4.5" max backspacing. I have the LT Camburg kit of my '05 Tacoma and there's plenty of clearance with the Stealth 6 wheels(same spec at the SR8).
SCSPerformance
Official Vendor
It's only a little update, but we've been able to start the process with our manufacturer. There's a subtle change to the step lip design. It's very minor and it did not change the look and feel of the SR8.
Basing off of our original 3D render, we went one step back and speced out the wheel design. This is the official 2D layout that will be used to create an official 3D render and from there our MOLD.
Basing off of our original 3D render, we went one step back and speced out the wheel design. This is the official 2D layout that will be used to create an official 3D render and from there our MOLD.
mikey's2010SR5
New member
Vin
Looks like the spokes pull out towards the outer lip. For see any clearance issues with the brake caliper? (Just remember the Method wheels with similar design rubbing)
Can't wait for these to be out in production, my wheels are getting beat and want to be replaced. LOL
Whats an estimate price for a set of 5? In bronze of course.
Looks like the spokes pull out towards the outer lip. For see any clearance issues with the brake caliper? (Just remember the Method wheels with similar design rubbing)
Can't wait for these to be out in production, my wheels are getting beat and want to be replaced. LOL
Whats an estimate price for a set of 5? In bronze of course.
SCSPerformance
Official Vendor
According to our specs, there should not be any clearance issues with the calipers, but we will know for sure once our mold is finished and we test fit a real sample.
Pricing has not been set yet. I will announce it when I know for sure. Just keep an eye on this thread:biggrin1:.
mikey's2010SR5
New member
Awesome. And you know I will.
BrianSD_42
New member
I noticed the series 6 wheels on your website don't come in 16" form. Do you have plans for 16s ? I don't see myself ever going to 17s.
Thanks.
Thanks.
Last edited:
SCSPerformance
Official Vendor
Right now, we do not have any plans to produce this model in a 16" version.
SCSPerformance
Official Vendor
Sorry guys, I don't have any useful updates yet. I'm waiting for things to move just like you guys.
SCSPerformance
Official Vendor
Yes, just 16s and 17s for now. I do not have any pricing info yet as there are still some details we need to wrap up before that's decided.
