Sherpa Equipment Company - 4th Gen

[Hitmanhink]

Does anyone have the overall maximum length of the Sherpa Princeton roof rack? The website specs say that the dimensions are 89”x47-1/2”x2.5”* but can anyone confirm the overall total length at 89” long? Something tells me that might not be the exact dimensions? The width does add up just fine at 47-1/2” but I feel like the height must be more than 2.5” as well… can anyone give more precise dimensions?

 

[Boort]

Does anyone have the overall maximum length of the Sherpa Princeton roof rack? ... but I feel like the height must be more than 2.5” as well… can anyone give more precise dimensions?

[MENTION=679045]Hitmanhink[/MENTION]

Yeah Depends on where you measure.
The Height varies depending on where you measure. The 2.5" measurement is likely the height between the cross bars and the roof at top center. More by the sides.

If you are looking for dimensions of side rails on my early Princeton I get the following measurements. I believe that there have been changes since I bought mine. I know that the "Sport" model is definitely different from these.

Since it was too dark to take pics, I borrowed one of the promo pics to show how I measured to get these measurements.

Boort

 

[Hitmanhink]

I’m curious if the newer model is any different in length? Does anyone have the newer one that can check the measurement? I’m mostly concerned with the overall maximum length.

 

[SherpaEquipmentCo]

I’m curious if the newer model is any different in length? Does anyone have the newer one that can check the measurement? I’m mostly concerned with the overall maximum length.

The overall length of the Princeton rack, tip to tip as measured above is 89.5"

 

[Hitmanhink]

The overall length of the Princeton rack, tip to tip as measured above is 89.5"

Awesome thank you!

 

[vonRunner]

[MENTION=413201]SherpaEquipmentCo[/MENTION] - Any chance there's a Sport Series rack in the future for 4th Gens?

 

[SherpaEquipmentCo]

[MENTION=413201]SherpaEquipmentCo[/MENTION] - Any chance there's a Sport Series rack in the future for 4th Gens?

It is in the build list! No eta on availability as it will be followed by some in-depth testing. It likely will be available in 2024.

 

[AntonioCm1983]

I second this I have one missing and would like to find a replacment toyota don't have them

Suggestion,

You should offer some rubber strips that can be inserted in the rails of the rack to prevent the rails from holding water when not in use. Or to fill in the rails around attachment point for gear.

I don't own one yet, but will be buying one when I'm ready to invest in a RTT.

Thanks!

 

[AntonioCm1983]

This would be amazing if they were available to buy toyota dont make them no more