SHROCKWORKS Summer Group Buy 2013

[ugamurph]

Anyone know if you need the relocation brackets for the bumper if you only run a 1" lift? Their website says the brackets are for 1.25-2" body lifts...

Maybe [MENTION=63082]TxBxSx[/MENTION] can chime in here. He works at Shrockworks. Or give them a call to clarify. They are very helpful there. 877-474-7625

 

[ugamurph]

Man you are killing me. I am TRYING to resist!

Ha! I caught that "like" way back when and figured you would want to join us. No pressure! :biggrin2:

Just got my PIAAs installed in Lowe grill too. Hmmm.... Anyone know if the PIAA 510's would fit in the Shockworks front bumper where the factory fogs go? (Probably not)

I'm assuming your talking about a 5th gen. The 3rd and 4th gen accept the PIAA 510s. Check with Shrockworks on that. They may be able to make slight modifications to accept the 510s.

 

[ColoradoFrosty]

Ha! I caught that "like" way back when and figured you would want to join us. No pressure! :biggrin2:



I'm assuming your talking about a 5th gen. The 3rd and 4th gen accept the PIAA 510s. Check with Shrockworks on that. They may be able to make slight modifications to accept the 510s.

Yep ugamerph, 5th gen.

Just keep reelin' me in...

 

[ugamurph]

Yep ugamurph, 5th gen.

Just keep reelin' me in...

:fish2:

 

[TxBxSx]

Anyone know if you need the relocation brackets for the bumper if you only run a 1" lift? Their website says the brackets are for 1.25-2" body lifts...

I would order body lift brackets. Our standard 1.25-2" brackets might be a bit tall for your application, but we have had others ask for this in the past and have 1" body lift brackets designed as well. Just note "Custom 1" Body Lift Brackets" on your order and we will get you fixed up!

 

[USMCRUNNER]

Hey ugamurph need to change my order. Had some things come up and can't get the bumper. I'm still in for the group buy though. Going with slider's instead.

USMCRUNNER; 5th Gen, Trail(KDSS), Rock sliders, 3 supports, textured black powder coat

Thanks

 

[ncWILLI5]

ncWILLI5- 1999 T4R SR5, rear bumper without tire rack, black powder coat, 4 shackles total(front and rear)

 

[having fun]

Man you are killing me. I am TRYING to resist!

Just got my PIAAs installed in Lowe grill too. Hmmm.... Anyone know if the PIAA 510's would fit in the Shockworks front bumper where the factory fogs go? (Probably not)

I better make up my mind here pretty quick!

Piaa's 510's will fit. 4" opening. Shows in my build thread.

 

[ugamurph]

ncWILLI5- 1999 T4R SR5, rear bumper without tire rack, black powder coat, 4 shackles total(front and rear)

Hey ugamurph need to change my order. Had some things come up and can't get the bumper. I'm still in for the group buy though. Going with slider's instead.

USMCRUNNER; 5th Gen, Trail(KDSS), Rock sliders, 3 supports, textured black powder coat

Thanks

I'll get [MENTION=97840]USMCRUNNER[/MENTION] changed & [MENTION=95199]ncWILLI5[/MENTION] added when I get home to the laptop.

 

[phx]

T4R (5th, 2012 LE), Trail Edition Rocker Trim (Part # T4R5-TETRM)

 

[ColoradoFrosty]

Piaa's 510's will fit. 4" opening. Shows in my build thread.

Excellent. Ya got me, I'm in!

5th Gen 2012 Limited - Front Bumper, center hoop only, Black Powder Coat, 2 Shackles.

Edit: I called Shrockworks and 5th Gen front bumper does NOT have the 4" opening for mounting PIAAs like the 4th Gen bumper. 5th Gen bumper will only take stock fogs.

 

[ugamurph]

Sent to me via PM.
tytacoma89:Tacoma (1st gen) sliders, extra support
[MENTION=91201]tytacoma89[/MENTION]

 

[ugamurph]

First Post Update. We're almost there! Thanks for the great response.


[MENTION=67079]Fjatheart[/MENTION] [MENTION=88447]kenski[/MENTION] [MENTION=97595]traillite[/MENTION] [MENTION=91425]LOSTR4[/MENTION] [MENTION=94888]EatonKyleH[/MENTION] [MENTION=29376]sandcrawler[/MENTION] [MENTION=97754]bitman[/MENTION] [MENTION=96828]hipnix[/MENTION] [MENTION=91293]TXAg03[/MENTION] [MENTION=67817]pimpsta[/MENTION] [MENTION=97840]USMCRUNNER[/MENTION] [MENTION=97203]Jmdwifi[/MENTION] [MENTION=96713]drewm[/MENTION] [MENTION=82384]skypig22[/MENTION] [MENTION=97614]swimmerdude1127[/MENTION] [MENTION=55815]Okki[/MENTION] [MENTION=55855]zopperman[/MENTION] [MENTION=95199]ncWILLI5[/MENTION] [MENTION=84192]phx[/MENTION] [MENTION=80103]ColoradoFrosty[/MENTION] [MENTION=91201]tytacoma89[/MENTION]

 

[fenderpicks]

I want in

2013 Tacoma Rear Plate Bumper / Powdercoat

 

[ColoradoFrosty]

I see a number of you getting bumpers in bare metal and am curious with what your plan is... Anyone?

Been contemplating different finishes myself.

Thanks

 

[ugamurph]

Been keeping an eye on this thread. I just need to confirm a commercial shipping address before I pull the trigger. Also trying to get more Toyota guys from my work to join in!

I found out today that SW uses UPS Freight for their shipments.

 

[ugamurph]

I see a number of you getting bumpers in bare metal and am curious with what your plan is... Anyone?

Been contemplating different finishes myself.

Thanks

I know that [MENTION=67079]Fjatheart[/MENTION] and I are planning to do a quality rattle can. In our opinion, that will make paint repairs of trail rash easier and cheaper. I had considered a body color matched finish, but I think I'm going to stick with a satin black.

 

[Fimbulvetr]

I found out today that SW uses UPS Freight for their shipments.

Awesome, the UPS distribution hub for my area is down the street. While I am logged in please add me to the list!

Fimbulvetr: 4runner (2012 Trail), 5th Gen 4Runner Winch Bumper, center hoop only, no top lights, 2 black clevis shackles, powder coat

Thanks for putting this together Ugamurph!

 

[Fjatheart]

Add'em on up Murph!

 

[having fun]

Excellent. Ya got me, I'm in!

5th Gen 2012 Limited - Front Bumper, center hoop only, Black Powder Coat, 2 Shackles.

Edit: I called Shrockworks and 5th Gen front bumper does NOT have the 4" opening for mounting PIAAs like the 4th Gen bumper. 5th Gen bumper will only take stock fogs.

You can ask them if they can set it up to accept the 4". They usually will accomadate, maybe for an additional cost.

Many others have had different things done/modified to there bumpers from SW.