SHROCKWORKS Summer Group Buy 2013

[Spenser]

Order placed -- 4Runner (2007), Front Bumper, Black Powdercoat, No Tubes, and (per email and telephone w/Mark) to-be-designed twin Rigid Industries Dually D2's (driving and wide beam) on each side

 

[Fimbulvetr]

Order placed! :rockon:

4runner (2012 Trail, 5th Gen) Winch Bumper, center hoop only, 2 shackles, powder coat

 

[TideRunner]

Order placed! I am the excited! :bravo:

 

[ugamurph]

Today's the last day to get the 15% discount. Get your orders in before midnight (CST).
[MENTION=97907]Gnzo[/MENTION] [MENTION=91201]tytacoma89[/MENTION] [MENTION=98099]fenderpicks[/MENTION] [MENTION=98042]LEX LUTHOR[/MENTION] [MENTION=70066]jam46283[/MENTION]

 

[Howard35]

Order Placed -
Fuel Tank Skid
TE Rocker Trim

 

[ugamurph]

Order Placed -
Fuel Tank Skid
TE Rocker Trim

Welcome aboard!

 

[Howard35]

Welcome aboard!

Thanks... Been lurking around for quite awhile now, but was waiting to get a lift installed before I made my first post.

FYI - Added order for sliders to previous order; looking to get the version rendered in the
http://www.toyota-4runner.org/5th-gen-t4rs/139557-name-these-sliders-3.html thread if they can be ordered with dimple tread and compatible with XREAS.

 

[ugamurph]

Thanks... Been lurking around for quite awhile now, but was waiting to get a lift installed before I made my first post.

FYI - Added order for sliders to previous order; looking to get the version rendered in the
http://www.toyota-4runner.org/5th-gen-t4rs/139557-name-these-sliders-3.html thread if they can be ordered with dimple tread and compatible with XREAS.

Hit up Justin (@TxBxSx) on here or call Shrockworks on Monday morning to clarify that. I believe someone else in the GB worked something out on those sliders as well. And don't forget to ask about your free Tshirt if you didn't add it to the notes line of your order.

 

[Okki]

Thanks... Been lurking around for quite awhile now, but was waiting to get a lift installed before I made my first post.

FYI - Added order for sliders to previous order; looking to get the version rendered in the
http://www.toyota-4runner.org/5th-gen-t4rs/139557-name-these-sliders-3.html thread if they can be ordered with dimple tread and compatible with XREAS.

DannyLlama was the other XREAS slider questioner. Just get them with bolt-on gussets on all 4 corners and you are set. That way you will not have to mess with pulling out the XREAS lines.

Below is the content of the email I exchanged with Danny on the subject:

I pulled out my XREAS line a bit and used a bolt, some nylon spacer and a hose clamp to keep them out of the way. However, if you request your sliders to be built with bolt-on gussets on all 4 corners, you won't have to do that because the plate will be behind the line, and the gusset will bolt over the line (so the XREAS goes through the "hole" in the gusset).

If I were you I'd call them with your order and talk it through. A side benefit is that you can break the payment in two as well with only half down and half at powder coat.

This is the rear on mine; you want all corners like this.

Before the fix:

This is my fix for the front; as shown above, the bolt on gusset would eliminate this issue.

Okki

 

[Gnzo]

Sorry I wasn't able to reply until today. I placed my order on Friday. Both the sliders and the front bumper!

Thanks again for all the organization.

 

[ugamurph]

Just over 2 hours left in the discount period! Get those orders in if you want the 15% discount.

 

[DannyLlama]

Just over 2 hours left in the discount period! Get those orders in if you want the 15% discount.

Dang 40 orders!!!

You should have had a deal with them if you got 40 orders!

 

[ugamurph]

SHROCKWORKS SUMMER GROUP BUY 2013


DISCOUNT PERIOD HAS ENDED​

I want to personally thank everyone who participated in the largest T4R.org group buy that Shrockworks has ever seen. We ended up having at least 40 large item orders. I enjoyed organizing this event and look forward to seeing everyone's installed products. Be sure to come back to this thread and post pictures when you have your Shrockworks products installed. Because of y'all, Shrockworks Summer Group Buy 2013 was a huge success.

Thanks again,
Jamie M.

 

[ugamurph]

If you ordered products with the GB discount code and didn't reply to the thread with what you ordered, take a minute to send a reply with: "username: vehicle (gen) product ordered". I'll add it to the list.

We all want to see just how many and what orders this GB actually generated.

 

[Colonal Angus]

Well, just returned from a 2 week PNW tour. Awesome trip but I missed out on SW group buy . Hopefully, there will be another this year or perhaps a grace period/second chance to order on this GB. I was hoping for a winch bumper with center hoop and light guards for my new Trail.

 

[zopperman]

anyone else constantly checking their email praying that somehow their order has shipped? :heh:

 

[ugamurph]

anyone else constantly checking their email praying that somehow their order has shipped? :heh:

I feel your pain! I've been easing the anxiety by researching and finding a winch to fill my bumper with.

 

[ugamurph]

I ordered my Superwinch Talon 9.5 SR today. Can't wait to mount that in my Shrockworks bumper.

 

[EatonKyleH]

It's not from the group buy but my sliders I order 3 1/2 months ago showed up today and they are beautiful.

Now waiting for those bumpers I ordered on this awesome group buy but this may hold me over.

 

[ugamurph]

It's not from the group buy but my sliders I order 3 1/2 months ago showed up today and they are beautiful.

Now you're just rubbing it in! And we wait...