SoCal Meet-up?

hi i'm new to 4runners.. trucks in general.. can anyone recommend a shop to do suspension work that know what they're doing with 4runners?

i know lots of shops in 626 / 909 for sports car etc but i have doubts about their know how regarding 4runners

thanks
 
Looks like I will also be rolling up that way I will be leaving Buena Park and taking the 91 out to the 10. CB on 13. 810moto you should still have my # if you guys are going this way let me know when you are getting close to beach and the 91 I can jump on and run out with you all.

Toytruck This may work for you as well.
 
^I might be in Corona on that Friday so I may leave from there. If not, I'll shoot you a text driffter, I still have your number in my phone.
 
810moto said:
1st note:
So I have done some searching and I THINK I have found the actuall address of the ranger station. the map on google shows this address.

34701 Mill Creek Road
Mentone, CA 92359-9761
if this is wrong, someone please correct it. Just easier to pop in an address to the gps and go straight there vs hoping we all find each other.



What is everyones starting point?
Click to expand...

I am heading out from Huntington Beach, but it won't be as early as 6:30. It only takes a little over an hour to get there...

Can anyone else confirm if the above point is about where the ranger station is? For some reason I can't picture it. I typed in ranger station on my iPhone and got the same point as above.
 
810moto said:
1st note:
So I have done some searching and I THINK I have found the actuall address of the ranger station. the map on google shows this address.

34701 Mill Creek Road
Mentone, CA 92359-9761
if this is wrong, someone please correct it. Just easier to pop in an address to the gps and go straight there vs hoping we all find each other.

2nd note:
Those running a CB the channel noted in a post somewhere on here says CH13 so that is what I will be tuned to all the way up.

I will be leaving my house at about 6:30 and probably meeting up with Donny down the street. Those around the area of Long Beach, Seal Beach, Lakewood, Bellflower, Cerritos, Cypress and others close by, lets all try to meet somewhere on the Hwy while mobile and head on out.

What is everyones starting point?
Click to expand...

6:30? Wow. That is a bit too early. Isn't it? Moto. I am right at 22W and 405N. (Cypress, West Garden Grove area). We can caravan together.

I'll PM you my number.
 
34701 Mill Creek Rd. (a.k.a Hwy 38) Mentone CA is the correct address. It is just East of Bryant Ave.

I am still hopefull to have my runner together in time for the run. Got all the parts now(or so I hope) and just need to be busy everynight this week putting them on afterwork. Will lay all the parts out and take a picture tonight so can see what all I am facing. My biggest concern is the Pressure line going into the old steering rack doesnt want to come out and can't afford to replace it if I damage it right now. If that happens then I will definitely have to ride with someone.
 
Pikeman said:
34701 Mill Creek Rd. (a.k.a Hwy 38) Mentone CA is the correct address. It is just East of Bryant Ave.

I am still hopefull to have my runner together in time for the run. Got all the parts now(or so I hope) and just need to be busy everynight this week putting them on afterwork. Will lay all the parts out and take a picture tonight so can see what all I am facing. My biggest concern is the Pressure line going into the old steering rack doesnt want to come out and can't afford to replace it if I damage it right now. If that happens then I will definitely have to ride with someone.[/QUOTE


My steering rack lines were a.PITA. I ended up letting the rack hang on the hose and spun the rack off of the hose fitting. If that makes any since. the new one went back on the same way.
Click to expand...
 
somebody should start a new thread with the details for this weekend, since this thread is umpteen pages of mush. maybe the thread can be titled: SoCal June 18th, 2011 Meetup
 
Last edited:
driffter33 said:
Looks like I will also be rolling up that way I will be leaving Buena Park and taking the 91 out to the 10. CB on 13. 810moto you should still have my # if you guys are going this way let me know when you are getting close to beach and the 91 I can jump on and run out with you all.

Toytruck This may work for you as well.
Click to expand...
warren, i still have your number and will give you a call when we get close.
 
Progress is made on the rebuild. Only thing still hanging me up from finishing is the old power steering pressure line still wont come off.
 

Attachments

  • DSCF5374.jpg
    DSCF5374.jpg
    135.3 KB · Views: 594
  • DSCF5375.jpg
    DSCF5375.jpg
    110.3 KB · Views: 595
Good OffRoad 4Runner Vendor - ALL PRO OFFROAD

silversx said:
hi i'm new to 4runners.. trucks in general.. can anyone recommend a shop to do suspension work that know what they're doing with 4runners?

i know lots of shops in 626 / 909 for sports car etc but i have doubts about their know how regarding 4runners

thanks
Click to expand...

"ALLPRO OFFROAD"

I was sent by almost 5 other shops to these guys in Hemet CA. They only work on Toyota Offroad Vehicles. "ALL-PRO-OFF-ROAD" ====> https://www.allprooffroad.com/ :D

Business hours from 8:00 AM to 5:00 PM PST, Monday through Friday, except major holidays.

541 N. Palm Ave.
Hemet, CA 92543

Technical/Sales
Phone: 951-658-7077
Fax: 951-658-2375
Email: [email protected]
 
Pics of 06-18-11 So Cal Meet and Trail Run

If you missed this event, Man you really missed out on the biggest meet yet.. :cheers: Enjoy the pics.. :snacker:

IMG_20110618_093457.jpg~original

IMG_20110618_102316.jpg~original

IMG_20110618_102326.jpg~original

IMG_20110618_103658.jpg~original

IMG_20110618_113846.jpg~original

IMG_20110618_120003.jpg~original

IMG_20110618_120014.jpg~original

IMG_20110618_120959.jpg~original

IMG_20110618_124059.jpg~original


Can't wait till next month's event.. :cheers:
 
That was good fun, many thanks to the organizers.

Quick question for you experienced guys. I drove the trail in 2WD, is it better to engage 4WD before you need it or only as you lose grip then revert back to 2WD?

Second question, on some of the tight corners can you engage 4WD thru the corner? I thought I read that it is not good to do so?

Looks like my next step is to shed the stock rubber and get some proper rubber.
 
You must log in or register to reply here.

Members online

Total: 458 (members: 2, guests: 456)

Forum statistics

Threads
278,310
Messages
3,554,080
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top