SPC 25460 Parts List?

[nc-grayson]

Anybody ordered SPC UCA's recently enough to remember all the parts that were included in your set?

Received my UCA's earlier this week. I believe everything is there just based on common sense, but the method of shipping was absolutely horrific so I'm just double checking to make sure I received everything before I dive in. I didn't receive any parts list, just a one-pager with installation instructions.

I received the package literally exactly how you see it here. NO exterior shipping box, just the actual package box itself. Not a single shred of tape on it anywhere. Just literally the red box seen here which is flimsy in itself because of the weight of the parts. It was LITERALLY sitting half open on my doorstep just as you see here.

I received two arms, a baggie of various hardware and bushing grease, and a baggie with two ball joints. And the installation sheet. Like I said, I believe it's all here but anything could have vanished at any point during the shipping process because this thing seriously wasn't even taped closed at any point in it's life.

TIA

 

[JRZEE2000TR4LTD]

Anybody ordered SPC UCA's recently enough to remember all the parts that were included in your set?

Received my UCA's earlier this week. I believe everything is there just based on common sense, but the method of shipping was absolutely horrific so I'm just double checking to make sure I received everything before I dive in. I didn't receive any parts list, just a one-pager with installation instructions.

I received the package literally exactly how you see it here. NO exterior shipping box, just the actual package box itself. Not a single shred of tape on it anywhere. Just literally the red box seen here which is flimsy in itself because of the weight of the parts. It was LITERALLY sitting half open on my doorstep just as you see here.

I received two arms, a baggie of various hardware and bushing grease, and a baggie with two ball joints. And the installation sheet. Like I said, I believe it's all here but anything could have vanished at any point during the shipping process because this thing seriously wasn't even taped closed at any point in it's life.

TIA

Would help if you spread it out so we could see it. No matter I remember it came with:

16 washers for the bushings
4 Sleeves for inside the bushings
2 Balljoints with zerks (the zerks signify the newer style ball joint)
2 large yellow nuts for the balljoints
2 large washers for the balljoints
2 star plates
2 Knuckle inserts and snap rings
2 grease packets

 

[Road Bull]

Not that it will make you feel any better, but that's about how I received mine. Maybe better, but I had the same feeling opening it up because it was going to be a minute before I was able to get around to installing it.

Word of advice. Take the SPC alignment cheat sheet, get a few copies, laminate them, and keep them in the 4runner to have handy when you get an alignment. I just carry them in my rear passenger seat storage so I can't forget them.