SurferJoe's 14 4runner build
- Thread starter fbksurferjoe
- Start date
fbksurferjoe
New member
Thanks guys, I installed an awning about a month ago as well with an led light and room attachment. I'll set it up and snap some pics when I get a chance.
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
fbksurferjoe
New member
After much back and forth on my rear suspension i bit off on metal tech offset lower links. I am retaining my 2895e ome springs and 2.5 Icon remote reservoir shocks. Here it is installed. Sorry for the cell phone pictures I am planning a photo op tomorrow to show off the awning, led light and some other stuff.
I finished and am in the process of finishing a few other fabrication products. An awning bracket for the prinsu roof rack. A special bracket to mount rotopax to a prinsu rack and some shock shin guards, because i didnt want to pay for Icon's shin guards.
I finished and am in the process of finishing a few other fabrication products. An awning bracket for the prinsu roof rack. A special bracket to mount rotopax to a prinsu rack and some shock shin guards, because i didnt want to pay for Icon's shin guards.
Last edited:
fbksurferjoe
New member
Anyone having issues with greasing the lower links due to access I came up with a solution today. You may have figured it out already but just in case pick up one of these for your grease gun.
Last edited:
matoose
New member
After experiencing plastidip on my wheels I got a lot of overspray on my front grill, all my logos and my fender flares woops..... I also ordered a rago fabrication lightbar mount and an amazon special led bar.
I like the look. How many cans of Plastidip did you need? I have a 13 SR5 and want to do the flares, rockers, and part of the bumper. Just no feel for how much it'll take.
fbksurferjoe
New member
Have been busy working on the 4runner and finally got around to taking some pictures.
First up is the Ham Radio. Purchased an ICOM and mounted it remotely. Main unit under the seat. Additionally I picked up a speaker and flush mounted it in the kickpanel with a small amplifier to power it. Both the Radio and the amplfier for the speaker are turned on via a switch on the dash. The antenna is mounted on the roof rack and it is one of the fold down type so I dont wack it on anything.
First up is the Ham Radio. Purchased an ICOM and mounted it remotely. Main unit under the seat. Additionally I picked up a speaker and flush mounted it in the kickpanel with a small amplifier to power it. Both the Radio and the amplfier for the speaker are turned on via a switch on the dash. The antenna is mounted on the roof rack and it is one of the fold down type so I dont wack it on anything.
Last edited:
fbksurferjoe
New member
I also got sick of the stock usb charger in the vehicle so I changed it out to a dual 2.1 amp socket.
Last edited:
fbksurferjoe
New member
I was bored one day and threw together a Ipad mount out of some steel I had lying around. I used some RAM mounts to finish it off.
Last edited:
fbksurferjoe
New member
Some shin guards for the new 2.5 shocks I put on. Made of 1/8 inch steel.
Last edited:
fbksurferjoe
New member
Lastly I purchased a new fridge and got the rear storage unit powder coated.
Last edited:
fbksurferjoe
New member
Next week I will show off the Blueridgeoverland bag set I purchased and the dual gps receiver I picked up.
fbksurferjoe
New member
sorry didn't see the reply, about 2 cans for all the flares and grill, maybe 3 at most.
Sent from my SM-G920V using Tapatalk
MrsOutbound
New member
Wow, great looking build. Are those shine guards custom made?
fbksurferjoe
New member
Thank you, yeah I took a look at the Icon ones and copied them to the best of my ability. I didnt like how short the Icon ones were so I made them a little bit longer to protect more of the shock.
fbksurferjoe
New member
Have been busy, will get some pictures today of the blue ridge overland bags. Also a friend of mine threw together a tire table that stores next to my fridge.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
fbksurferjoe
New member
Have been MIA for a while. I have been busy both in my personal life and on the 4runner. I have a list of stuff to put up; relentless lo pro bumper and winch, expedition one rear bumper with swingout, tire table, new rear camera/anytime camera mod, rear backup lights/ work lights. Will be snapping pictures within the hour.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
fbksurferjoe
New member
Ok in order of completion, first up is the tire table. This is not an original idea, however we made it completely different to fit my application. The table hangs along side my fridge and is easily removed and placed on the tire within a few minutes. Just big enough for a partner stove, 2 people to eat lunch or a card game.
Last edited:
fbksurferjoe
New member
Next the Relentless Lo pro bumper with Smittybilt wireless winch.
Last edited:
Similar threads
