Surprising my son with a 04 sport, offset question

Doc-Harley

New member
I had daystar 2 1/2 x 2 lift installed and would like to have 285/70/17 cooper ST put on it before I give it to him. Would an aftermarket wheel with a different offset prevent the rubbing of the uca during normal road use? If so what offset would I look for. Thanks Dr.Shepherd
 
Register to hide this ad
Doc-Harley said:
I had daystar 2 1/2 x 2 lift installed and would like to have 285/70/17 cooper ST put on it before I give it to him. Would an aftermarket wheel with a different offset prevent the rubbing of the uca during normal road use? If so what offset would I look for. Thanks Dr.Shepherd

Nice gift :D
 
find.gif


there is a lot of info here regarding tire sizing, use the search function and you will see a number of posts regarding fittment of 285's
 
Last edited:
Thanks for the replies, I have gone over this site many times and seem to end up more confused than I was to begin with. Once again thanks, I'll get it figured out.
 
I would go to the wheel/tire dealer and have them try the different combinations. It gets tricky because you may have one wheel that has less offset but is wider and that will negate any advantages of the offset. Hope this helps...
 
Doc-Harley said:
I had daystar 2 1/2 x 2 lift installed and would like to have 285/70/17 cooper ST put on it before I give it to him. Would an aftermarket wheel with a different offset prevent the rubbing of the uca during normal road use? If so what offset would I look for. Thanks Dr.Shepherd

Adopt me.... ':awais:'
 
look for a wheel that has around 4.5" backspacing. In other words a 17x8 with offset between 0 and -25mm

If there is rubbing a set of wheel spacers can be added. There are different sizes ranging from 0.25" - 1.25"
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,105
Members
248,016
Latest member
Advally Service

Trending content

Back
Top