T4R Uwharrie National Forest Run 11/29/14

Wifey and I have decided to camp Friday night instead of Saturday at the Badin Lake campground, so if anybody is down and wants to roast a marsh mellow or two, stop on by. :fro:
 
Wifey and I have decided to camp Friday night instead of Saturday at the Badin Lake campground, so if anybody is down and wants to roast a marsh mellow or two, stop on by. :fro:

Stay warm out there Leatherneck. My princess isn't much of a camper plus we have a 16 month old, so it ain't happening. See you all Saturday though!
 
Room for 1 more?

If its cool, I'm planning on joining. My 5th gen is pretty much stock at this point but I'd love to see what it can do and see some of the modded trucks get after it. I'd plan to shoot over from Garner that morning possibly with a buddy.
 
If its cool, I'm planning on joining. My 5th gen is pretty much stock at this point but I'd love to see what it can do and see some of the modded trucks get after it. I'd plan to shoot over from Garner that morning possibly with a buddy.

Of course we got room. I've added you to the list. See you Saturday.

For those traveling long distances, have safe trips. Those camping, please stay warm. Looks like sub freezing low temps. Happy Thanksgiving all. See you Saturday!
 
im picking up my first 4runner tomorrow haha.. 94 4x4 v6 5spd.. it has ranchero shocks all the way around but no lift.. larger than stock tires though.. ive been to uwharrie a few times in my prerunner tacoma, didnt go down any of the mentioned trails since i didnt have 4x4.. i might just see if i can make it up saturday..
 
Enjoyed yesterday. Now need help with Lift recommendations!!

So I'm thinking I'd like to take advantage of the Toytec 10% off which ends today. I have the black 2014 trail and I am looking at the following:
BOSS Kit
Radflo Extended Travel

Then my next question is whether it is imperative to install new UCAs with these setups. If the answer is yes, which do you guys think are the best bang for the buck? I would not buy the LR ones after reading many of posts.

Lastly, what size tires would you guys recommend with this setup? I'm trying to get as much ground clearance as possible as I spend a lot of time in deep sand on the beach.

Thanks for any advice!
Brian
 
So I'm thinking I'd like to take advantage of the Toytec 10% off which ends today. I have the black 2014 trail and I am looking at the following:
BOSS Kit
Radflo Extended Travel

Then my next question is whether it is imperative to install new UCAs with these setups. If the answer is yes, which do you guys think are the best bang for the buck? I would not buy the LR ones after reading many of posts.

Lastly, what size tires would you guys recommend with this setup? I'm trying to get as much ground clearance as possible as I spend a lot of time in deep sand on the beach.

Thanks for any advice!
Brian

Great meeting you out there yesterday Brian. I'm glad that you could make it out to the run and that we could help fuel the desire to mod lol.

Between the two you're eyeing, I'd go BOSS personally. Main reason being you save $20 on the price of the kit and since the BOSS includes a spanner, that's another $20 that you'd have to spend on the Radflo. Also the fact that the front and rear shocks were spec'd for the application intrigues me.

With the Radflo, you'd be paying a little more for the name and the front shocks are rebuildable if that's a feature you desire. From what I've experienced, Radflo customer service seems to be pretty good if that's important to you, but I've also read multiple accounts of users not satisfied because sometime their suspension "clunks" as well as some people dissatisfied with repeatedly blown shocks. Though that was more the rear 2.0 shocks, with the toytec kit you'd be getting Bilstien 5100's unless you pay the upcharge for Radflos. The Billies are solid.

But depending on what you're planning on doing with it, I'd be inclined to sway you toward a 2.5" shock body. If you looked at mine, Austin's, or Bobby's if it had been there, we all have 2.5" coilovers in the front and they also have 2.5" rear shocks as well. If you plan on running extra weight like bumpers, winch, skids, rack, gear, etc. The extra fluid capacity from bigger shock bodies will help them run cooler longer and guard against shock fade.

Regarding UCA's; are they imperative? No. Will you want them? Yes. Most that advertise "extended travel" like the Radflo kit will tell you they "require" aftermarket UCA's. The reason being is you need the UCA to maximize the travel that the longer shock affords you. Another piece to that puzzle though is that you mentioned maximizing ground clearance, so that essentially means running the most amount of lift possible which takes away your caster on stock arm geometry which is the reason you get aftermarket UCA's to begin with.

And yes, I'd probably would not recommend getting the LR ones, even though I think they're fine and offer more adjustability than anything else on the market, but after moving to a Uniball design from the balljoint design, I very much prefer the uni's. That being said, if I were in the market, knowing what I know, I'd probably buy the Desert Products UCA's. If I were on a budget and felt like gambling I might roll the dice on these $250 Ebay UCA's. Though, I may wait and let somebody else be the guinea pig here. I'm cautious because I recently rolled the dice on my current UCA's from Tuff Country because they had a great price and so far they seem to be insufficient in regards to added caster as well as the customer service from both the company and the retailer have been lacking so far.

For tire size for deep sand, you want width which equals floatation. I'd still only recommend probably a 285 at the widest which is my current set-up. 285/70R17 on mine which is a 33 x 11.5. I wouldn't recommend going any higher than a 33" tall tire, and 285 is about as wide as I'd feel comfortable running. And that's coming from somebody that just came down from a 12.8" wide tire. Even with 285, you can expect some clearance issues off road. I'm sure you heard my meats chewing into the plastic yesterday.

Anyway, that's the down and dirty. Hope that helps and answers most of your questions. When you're ready to install, just let me or Austin know. Good luck.
 
Had an awesome time yesterday meeting everyone. Thanks to PD for getting this together, and thanks to Austin for letting me ride shotgun on Dickey Bell and Dutch John, now I have to spend more money on my truck.... Can't wait to get started!

IMG_0060_zpsadfbad8a.jpg~original

IMG_0066_zps85bba2c3.jpg~original

IMG_0064_zps2e7bc9f4.jpg~original

IMG_0068_zpsf451abf9.jpg~original

IMG_0071_zps483fa506.jpg~original

IMG_0074_zps4d8e26fb.jpg~original

IMG_0076_zps0af016da.jpg~original

IMG_0077_zps973d9a1f.jpg~original

IMG_0083_zps4db5e469.jpg~original

IMG_0094_zpscb9692f4.jpg~original

IMG_0097_zpsb15e7425.jpg~original

IMG_0099_zpsdee0ba85.jpg~original

IMG_0119_zps3390c988.jpg~original

IMG_0121_zps447e8247.jpg~original

IMG_0124_zps28fc50ca.jpg~original

IMG_0125_zps705975d3.jpg~original

IMG_0130_zps0c5509b8.jpg~original

IMG_0131_zps3d59a05e.jpg~original

IMG_0132_zpscc52946b.jpg~original

IMG_0133_zpsb4fe171f.jpg~original
 
What a great time this weekend! Jennifer and I had an absolute blast, and wanted to thank PD, and Austin for putting together and running a fun, safe event. It was good for those of us with fairly new and stock 4runners to get a sense of what these vehicles are capable of.
We got to meet at least two others that had similar interests in wanting to do more "overland" type activities with their vehicle, and I hope to keep in contact with them.
Also wanted to thank Austin for having us on a ride along on the "dirty D's" I about had to pull his back seat out of my a$$ a couple of times :jaw:

Here is a quick vid of our fearless organizer doing his thing:
http://www.youtube.com/watch?v=bs304fjgnz0
 
Saw everyone at the Outpost Saturday morning then met back up at the traffic jam on Dickey bell.. did anyone snap any other pics besides the one of Jacob in the dovetailed and bobbed first gen pickup? basically the group of tacomas that rolled thru. I was the last one to come up in the white SAS ext cab... I know someone had to have gotten some of the basically bone stock FJ coming thru
 
Saw everyone at the Outpost Saturday morning then met back up at the traffic jam on Dickey bell.. did anyone snap any other pics besides the one of Jacob in the dovetailed and bobbed first gen pickup? basically the group of tacomas that rolled thru. I was the last one to come up in the white SAS ext cab... I know someone had to have gotten some of the basically bone stock FJ coming thru

Is this the SAS ext cab you're talking about?
<a href="http://s1267.photobucket.com/user/t4rghost/media/photo_zpseae22ad3.png.html" target="_blank"><img src="http://i1267.photobucket.com/albums/jj552/t4rghost/photo_zpseae22ad3.png" border="0" alt=" photo photo_zpseae22ad3.png"/></a>
 
Here the few good pics that I took. Great trip, we definitely need to plan a spring trip. I want to go on dickey and dutch once I get my control arms and sliders on.

a>~original

photo22_zpsf183588b.jpg~original

photo11_zps92d0af16.jpg~original

photo21_zps78e5aa85.jpg~original

photo31_zps8bc317f2.jpg~original

photo4_zps19c4b7b1.jpg~original

photo5_zps7bf763c9.jpg~original
 
Is this the SAS ext cab you're talking about?
<a href="http://s1267.photobucket.com/user/t4rghost/media/photo_zpseae22ad3.png.html" target="_blank"><img src="http://i1267.photobucket.com/albums/jj552/t4rghost/photo_zpseae22ad3.png" border="0" alt=" photo photo_zpseae22ad3.png"/></a>

Actually that's Blakes truck, was curious if anyone got any pics or video of this one



Ask and ye shall recieve.. FJ shows up near the end of the vid:
https://www.youtube.com/watch?v=RosXKNU5MNY&list=UU0xp7qV7H41bhuADLaYTkkA

Thanks! Any of the last white taco that came up??
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Trending content

Back
Top