***texas classifieds sticky***

[Bonesetter]

FS: Husky floor mat set for 5th gen, $150, Austin TX

My buddy traded in his 5th gen for a 4th gen because he was jealous of mine, and he's got the floor mats up for grabs for $150. Less than a year's wear on them, retail is about $310 new. He's not willing to ship, but can meet up with anyone in the Austin area or surrounding. PM for his contact info if you're interested.

 

[BIGpharma]

Selling TRD Pro grill (replica) in Houston, TX

Brand new. Comes with double sided tape. Pick up only

SOLD!

 

[Ocean Hitchhiker]

Tube steps in DFW. $100

Give me a follow on IG and like my rig [MENTION=61162]Ocean[/MENTION]hitchhiker

 

[oneisnone]

Any takers? Prices lowered to $200 and $250 respectively. Willing to drive around DFW to meet as needed.

Still have the suspension?

 

[murk3d]

Cornfed 1.5”/1” Spacer kit

Gauging interest in a Cornfed/Burtman 1.5” front / 1” rear spacer kit for TRD Pros. Only on for about 500 miles just wanting to go little higher. $120

 

[5th gen Nomad]

FS: 2012 limited custom 12" subwoofer box - $600 Irving, Texas

I have for sale a custom 12" subwoofer box that fit into my JBL subwoofer stock location. stealth box style. The woofer is a JL audio 12" tw3 and fits with very little modification. I just upgraded to a false floor and do not need it anymore.

pictures are of the box, box in the side panel and then with the side panel on. stealth look! just ad your mono amp.

 

[DDeezenuts]

Free 3rd gen limited fat lip bumper

https://www.toyota-4runner.org/for-...4runner-bumper-fogs-brackets.html#post3275778

Free fat lip bumper and frame reinforcement/bracket. Came off 2000 Limited. Local pick up in Arlington. Fogs and turn signals sold already. PM me if interested

 

[BIGpharma]

WTB: 5th gen Trail edition running boards (PT93889100)

 

[rvickery2]

WTB: 5th gen Trail edition running boards (PT93889100)

I have a set in perfect condition off a Trail in chrome.

 

[MalinoisRunner]

stock air intake

SOLD****

stock air intake from a 2016 trail. taken off at approx 25k miles. includes air filter

$125 shipped paypal/venmo/zelle
Dfw, TX

need a 30" light bar, can add cash...

 

[hstexan]

SOLD


I have a 4th gen Prinsu rack that I'm going to want to sell--nothing wrong with it, just not everything I wanted so it's getting replaced. New rack should be here today or tomorrow so this will be available by the weekend. I bought it brand new last May so it's been on for just over a year. I also bought two additional crossbars that I used with a RTT for one month, other than that the rack has pretty much only been used for my awning, occasionally carrying my spare, and a Pelican hard case. The wind deflector is the non-cutout version and I also have the noise reducing trim that I can include, but I never used because in the position I had it, I got a slight vibration against the roof. I will also include the Rhino Rack awning brackets (31103--these) I have been using for the past couple months. I bought this right before CBI/Prinsu switched to the drop-in style crossbars, so these do not have that. Cosmetically this shows signs of use--there are some chips in the powdercoat of the rails and scratches on some of the crossbars, but functionally there is nothing wrong with it.

New and shipped to your door these are just shy of $1100--the two extra bars were $80, the awning brackets run about $55. All in you're looking at over $1200 for this setup.

I am asking $675 for a local sale and I will meet you within a reasonable distance (I'm in Plano, but willing to meet in the metroplex depending on where you are).

 

[drew360]

WTB Used 4th Gen Tow Hitch Receiver

I am looking for a used tow hitch receiver for my 2008 4th Gen.
Mahalo!

 

[spoonmectr]

Gauging interest in a Cornfed/Burtman 1.5” front / 1” rear spacer kit for TRD Pros. Only on for about 500 miles just wanting to go little higher. $120

Still available?

 

[FunBobby]

TRD/Trail Wheels

Set of TRD/Trail wheels $400 obo, in Texarkana though I come to Dallas/Houston a couple times a year.

TRD/Trail Wheels by Bobby Bryan, on Flickr

 

[Tejas]

Spidertrax 1.25" wheel spacers

***SOLD***

Up for sale is a lightly used set of Spidertrax 1.25" wheel spacers. These are 6 on 5.5/6x139.7 for use with 1996+ Toyota 4Runner. The spacers are in excellent shape with no damage. Includes four blue aluminum wheel spacers, all 24 lug nuts, and instructions. Located in Bay City, TX, SOLD shipped to the lower 48 or SOLD local via PayPal FF/Gift.

Toyota Hub Centric Wheel Spacer Kit

 

[tv4184]

96-02 FX-R retrofit with 5k morimoto bulbs / 55w ballasts and PnP H4 wireharness

A set of OEM toyota 99-02 headlights that was retrofitted with FX-R projectors. I did this back in 2012. The only thing I didn't get right was bench aiming the projectors so they're pointed a bit too high. So you can dial this out with the stock adjustment or you would have to open them back up to fix this flaw. Otherwise, everything works as it should when I pulled the setup. I'm not keeping my 3rd gen so I won't need these anymore.

SOLD

 

[tv4184]

Got a set of 3rd gen Weathertech floor liners.

SOLD

 

[rossagge]

Just saw this thread. Cool.
Selling a few items off of my 5th Gen. I'm in Georgetown...Austin area.
-OEM Running Boards/tube type...SOLD!
-OEM TRD OR wheels set 4 for...$400 (also have 2 more I was going to use as spares...will sell if anyone is interested in singles) Wheels and center caps only.
-OEM TRD a/t shift knob...SOLD

Let me know. Can send more pics. Thanks.

Sent from my LG-US701 using Tapatalk

 

[tv4184]

Have a JDM Hilux Surf bull bar. Fits 96-98 models and has two spots to mount driving lights or whatever you would want to mount. Willing to drive to meet up but shipping this would be in the 100+ range. Asking $250 obo

Infinity 693.7i 6x9s - they come with crossovers and they were really good. Only used them for a while in my maxima. I’m going with 6.5 fronts for my 4th gen so I figured it’d be good to clean out the closet of my extra equipment... SOLD

Bull bar still available

 

[KP Texan]

WTB: OEM 5th Gen Front Skid Plate - Dallas

Mine is rusted out, so what do you guys have? I know some of you guys are rocking RCI or TRD and pulled yours almost new, haha. DFW area, but preferably North Dallas. Thanks!