Total Chaos +2 “ LT for KDSS

D

dom42

New member
All I can tell you is this kit is the sh#t. Rides so nice perfect for daily driving as well. Stock travel is just so bad. Extended travel is just ok. This is sooo perfect and depending on the wheels and tires you don’t need glass.

With that said I’m moving up to 35s and will be customizing the whole inner fender area to gain maximum full bump travel.

f429ae08b5197d6683f085207a4df269.jpg


faafbb9452ef69aa3f9b3fe87ccb86c3.jpg


3.0 triple bypass custom valving , stainless shafts finned resis for the secondary shocks. She boogies




Sent from my iPhone using Tapatalk
 
Register to hide this ad
is it up travel or down travel (or both?) that you gain by going LT for this platform?

also, how is KDSS affected by all of this? i read max lift height recommended was +2.5" for KDSS 4runners until someone could figure out a pivoting sway bar mount solution?
 
usdmej said:
is it up travel or down travel (or both?) that you gain by going LT for this platform?

also, how is KDSS affected by all of this? i read max lift height recommended was +2.5" for KDSS 4runners until someone could figure out a pivoting sway bar mount solution?
Click to expand...


Yeah that was me who came up with some drop blocks for the rear at the same time some one else was already working on the idea I just kinda made it happen first with out knowing Kyle from treatyoak was actually doing it too.

You gain travel from the arms being slightly longer. You gain both up and down travel. I’m running 34s so I have to do some major work to have full compression. Which it’s going under soon. Then you want limit straps to prevent the shocks from topping out. The kit comes with adjustable setup so as the straps stretch over time you can adjust.

Kdss mounts are exactly the same distance as the stock mounts from the pivot points.


Sent from my iPhone using Tapatalk
 
so since the kdss sway bar attaches farther in on the new LT LCA's, does that mean it has less leverage and is less noticeable even when running with the switch turned "on". i'm sure its spring rate is less now that the arms are wider but the sway is the same. just curious.
 
honda250xtitan said:
so since the kdss sway bar attaches farther in on the new LT LCA's, does that mean it has less leverage and is less noticeable even when running with the switch turned "on". i'm sure its spring rate is less now that the arms are wider but the sway is the same. just curious.
Click to expand...


It’s mounted exactly same distance from the lower arms pivots. It’s still affective.


Sent from my iPhone using Tapatalk
 
8b44aafc7aff9f1f76eea2756665c903.jpeg

Coyote cals chupacabra margarita is [emoji91]. I highly recommend if you down to Baja.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Members online

Total: 763 (members: 5, guests: 758)

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top