Transmission torque converter seal

[mforce]

Ok I have searched for this silly part. I know the transmission has one and I know it as the torque converter seal on the automatic transmission in the 2000 with the v6 5vzfe engine. I called the dealer and they sold me o-ring for the pump not seal that is on the input shaft that the torque counter slides on. Any thoughts on where I can get this seal? I was hoping to keep it Toyota seal.

 

[mforce]

Here is a better pic with the seal circled in red.

 

[GPsevinSixx]

This is the correct updated seal part number.

90311-38020

I purchased from Amazon when I replaced my torque converter and put in a shift kit on my A340F. Vague info out there, but it takes a bit of research. The first review on Amazon is from me. This is the correct seal you're looking for.

https://www.amazon.com/gp/product/B...arch_asin_title?ie=UTF8&psc=1#customerReviews

 

[mforce]

Thank you. I’ve been searching everywhere and the dealer was no help. Should I put in the pump o-ring or am I getting into a big ole can of worms?

 

[cfranck1]

Might be time for a new dealer..

Clearly shows it in the parts catalog serviced separately.

I'd just put in the front pump seal. Just leave well enough alone.

 

[mforce]

So you would or would not do the o-ring for the pump? I’m defined doing the torque converter seal. Never done the o-ring pump seal

 

[cfranck1]

So you would or would not do the o-ring for the pump? I’m defined doing the torque converter seal. Never done the o-ring pump seal

I wouldn't bother doing the pump o-ring.
You don't have the unbolt the pump from the assembly.

Just do the pump seal.

 

[mforce]

Thank you. Ordered and received the seal. Now time to install install.