TRD Headers....

Ol'Blue

Ol'Blue

New member
Can someone point me in the right direction or if they have a set they will sell let me know. Not easy to find. It's for a 99 Limited with a 3.4, after I get out of the people Republic of California I just might run it with open headers for a while for fun lol.... :becky:

Blue
 
Register to hide this ad
Headers

I just came across someone selling Doug Thorley headers in the Classified section. Check it out...it's a good deal in my opinion
 
they are discontinued... good luck finding a set. doug thorley is probably your best bet if you want some. and dont run them open if you want to keep your motor. you will "crystallize" the valves and do damage to the heads and possibly the pistons
 
I know...

the kid said:
they are discontinued... good luck finding a set. doug thorley is probably your best bet if you want some. and dont run them open if you want to keep your motor. you will "crystallize" the valves and do damage to the heads and possibly the pistons
Click to expand...

I just want to hear it one time and know what it sounds like.

My first truck was a built to the hilt F-150 and headers off that thing with a big block was Bad A man.

Blue
 
Thanks guys...

I'm going to call those guys in the morning and see if they still have that set. That is a nice price for a set. I messaged that guy off ebay and nothing yet. Still not convinced it is just not the box. Who really lists something with no picture of the product.:rockthrow:

Blue
 
Ol'Blue or any others, have you found a write up since you are looking for a pair? I've been looking for one of em, can't find any lol.
 
Have not looked...

02_SE_Runner said:
Ol'Blue or any others, have you found a write up since you are for a pair? I've been looking for one of em, can't find any lol.
Click to expand...

They are not hard to do. The biggest pain in the ass is just getting them in most of the time and getting everything lined up. After that it will be the welding part and that is not hard since I studied that stuff for two years alone. It was fun and I enjoy doing it, for fun only and building cool stuff. Now I just need a nice Miller Wire Feeder. Any one willing to let me weld. I'll buy beer and willing to teach, lol.

Blue
 
Bumper...

TRDteen said:
Shouldnt you be saving up to fix your front bumper and rear defroster button? hahaha :pound:
Click to expand...

That is pretty much a done deal. I need to get my hands on a welder. That rear defroster and window has me puzzled actually. Still working on that. Going to look at a parts truck for that issue. Really pissing me off honestly.

:beer:
 
Ol'Blue said:
That is pretty much a done deal. I need to get my hands on a welder. That rear defroster and window has me puzzled actually. Still working on that. Going to look at a parts truck for that issue. Really pissing me off honestly.

:beer:
Click to expand...

youre rear window wont roll down either? oh my... :hurt:
 
Ol'Blue said:
They are not hard to do. The biggest pain in the ass is just getting them in most of the time and getting everything lined up. After that it will be the welding part and that is not hard since I studied that stuff for two years alone. It was fun and I enjoy doing it, for fun only and building cool stuff. Now I just need a nice Miller Wire Feeder. Any one willing to let me weld. I'll buy beer and willing to teach, lol.

Blue
Click to expand...

Building hot rods I know I can do it, I just like to study before diving. lol :laugh:
Thanks for the input.
 
Woah woah woah.

Trademotion link is only for the y-pipe. $250 will not get you NEW TRD headers. I found some for $350 on CL a couple years ago... Couldn't make the time to pick them up.
 
You must log in or register to reply here.

Members online

Total: 347 (members: 2, guests: 345)

Forum statistics

Threads
278,304
Messages
3,554,033
Members
248,014
Latest member
xf-bot+t4r

Share this page

Trending content

Back
Top