WARN accessories, 4Runner axle, PIAA lights, TRD shift knob, and elocker parts.

[slomatt]

All parts are in the San Francisco Bay Area.


== Rear axle from a 2000 Toyota 4Runner w/ 4.11:1 gears ==

I swapped an elocker in my 4Runner and have the stock axle for sale. This includes the 3rd member, housing, and axle seals. There is no rust, and the axle only has 95k miles on it. This is a strong differential and a common upgrade for older Toyotas. I have no idea what its worth, so make an offer and we'll see if we can figure out a deal.


Recently I purchased a WARN winch setup for a Jeep and since I'm mounting it on a Toyota I have some spare parts for sale.

== WARN winch mounting plate w/ roller fairlead for 97-06 Jeep Wrangler (TJ) $175 OBO ==

I don't know what kind of Jeep the previous owner had this on, but based on the photos on Quadratec's website it looks like an exact match for the TJ mounting plate. The mounting holes are on 30 1/2" centers, and I'm happy to provide any additional measurements as needed. Both the plate and the fairlead are in very good condition and they come with the bracket for the solenoid box. The mounting plate is $230 new and the fairlead is $125 so I'm asking 50% of the original price.
WARN 37170 - WARN Winch Mounting Plate for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec


== WARN winch cable 100' 5/16" - SOLD==
== WARN winch cover - SOLD ==
== WARN 61560 Snatch block - SOLD ==
== Toyota elocker switch - SOLD ==
== TRD shift knob - SOLD ==
== 6" PIAA driving lights. - SOLD ==

 

[sigepbiker]

When did you buy the PIAA lights? They are showing a lot of signs of wear.

 

[slomatt]

When did you buy the PIAA lights? They are showing a lot of signs of wear.

They came with my ARB bumper. The lights are a bit dirty, but in good shape. I'm open to offers if you are interested.

- Matt

 

[Ilovemy97Limited]

Do the lights function like they should?

 

[rayjay]

I would take that shift knob if the stitching is all still good, which it looks like it is. Our stock one is falling apart. PM me paypal if that is $40 shipped...

 

[slomatt]

The elocker ECU, snatch block, and winch cable are all sold.

Do the lights function like they should?

They work 100% properly, I'm going to clean the dirt off and will take some pictures of them lit up sometime in the next few days.

I would take that shift knob if the stitching is all still good, which it looks like it is. Our stock one is falling apart. PM me paypal if that is $40 shipped...

The knob is pretty much brand new and shows no wear. The original owner said they installed it for a few days but then went with a metal ball instead, I never ended up installing it. The $40 price was before shipping, how about we say $45 shipped?

- Matt

 

[rayjay]

I will do $45 for the shift knob, hit me up. I can pay asap.

 

[OCMEDIC]

PM'd

 

[slomatt]

rayjay, sent you a PM.
OCMEDIC, replied to your PM.

 

[slomatt]

I cleaned up the PIAAs and they are in good shape, the only problem is that one of the bulbs is burned out. Because of this I'm lowering the price to $95. It's a standard H3 lamp so it shouldn't be a problem to replace.

I'd really like to get these out of the garage before I succumb to the temptation to put them on the front of my WRX.

Here are some new pictures.

 

[slomatt]

The elocker switch, winch cover, and trd shift knob have all sold. I'm open to offers on the PIAAs.

 

[wadle5]

I cleaned up the PIAAs and they are in good shape, the only problem is that one of the bulbs is burned out. Because of this I'm lowering the price to $95. It's a standard H3 lamp so it shouldn't be a problem to replace.

I'd really like to get these out of the garage before I succumb to the temptation to put them on the front of my WRX.

Here are some new pictures.

not going to lie, since I used to own and STi, and love that look. . .I say put them on your Subie!

 

[slomatt]

The PIAAs have sold.