Charles Bronson
Member
Here's what ~$8K in damage looks like to a 2020 TRD ORP looks like. My wife's 4Runner was t-boned by a teenager blindly pulling out of a CVS parking lot. It was a low speed impact but still did some rather expensive damage. No one was hurt thankfully.
What's needed:
- New front passenger door
- New front fender
- Black plastic lower rocker
- Rear fender flare
- Rework rear passenger door
- New side step. Surprisingly the impact on the side step didn't bend the body mounting points. I looked at this too.
- Pull out ultra tiny dent on interior portion of center pillar
- Rework front fender bracket
- New front wheel (it got gouged a bit)
- New front tires. The front tire was impacted on the sidewall so it's required to be replaced.
- Paint the doors and front fender and blend into the rear quarter panel.
- Tons of little parts and trim pieces
- New OEM clear rock guard on the lower door and rear fender flare. I had to help the estimator find Toyota part no. because Toyota doesn't note it in the door diagrams.
I think it will need a new top A-arm because the wheel appears to have an extra degree or so of camber, but they'll confirm once it's fixed and put on the alignment rack. My biggest concern was intrusion of the door into the lower body sill, A-pillar, or C-pillar. Luckily that wasn't the case. The paint wasn't even damaged in those areas.
All OEM Toyota parts are being used and shockingly, all are in stock and will be in on Tuesday/Wednesday next week. The wreck happened on Saturday and they said it should be ready ~12/10.
What's needed:
- New front passenger door
- New front fender
- Black plastic lower rocker
- Rear fender flare
- Rework rear passenger door
- New side step. Surprisingly the impact on the side step didn't bend the body mounting points. I looked at this too.
- Pull out ultra tiny dent on interior portion of center pillar
- Rework front fender bracket
- New front wheel (it got gouged a bit)
- New front tires. The front tire was impacted on the sidewall so it's required to be replaced.
- Paint the doors and front fender and blend into the rear quarter panel.
- Tons of little parts and trim pieces
- New OEM clear rock guard on the lower door and rear fender flare. I had to help the estimator find Toyota part no. because Toyota doesn't note it in the door diagrams.
I think it will need a new top A-arm because the wheel appears to have an extra degree or so of camber, but they'll confirm once it's fixed and put on the alignment rack. My biggest concern was intrusion of the door into the lower body sill, A-pillar, or C-pillar. Luckily that wasn't the case. The paint wasn't even damaged in those areas.
All OEM Toyota parts are being used and shockingly, all are in stock and will be in on Tuesday/Wednesday next week. The wreck happened on Saturday and they said it should be ready ~12/10.
Attachments
Last edited: