What do you carry on your Rago Modular Panels?

Bay33saw

New member
It could be other manufactures too, but I just bought a Rago rear set and I was wondering if anyone out there can post some pictures of your set up and what you all carry in the back.
I've been thinking Med Pack, Tow strap, flashlight and other stuff but I'd like to know what people have been carrying and not and what people use all the time.
I know everyone is different but I just want to see what others have done..

Thanks in advance.
 
Register to hide this ad
It could be other manufactures too, but I just bought a Rago rear set and I was wondering if anyone out there can post some pictures of your set up and what you all carry in the back.

I've been thinking Med Pack, Tow strap, flashlight and other stuff but I'd like to know what people have been carrying and not and what people use all the time.

I know everyone is different but I just want to see what others have done..



Thanks in advance.
I carry a first aid kit, an everyday carry kit, 3-cell flashlight, and a bag for hand tools. The other side has a Brooklyn Basher and a case.with Motorola handheld radios. I will be adding tow straps and a few other items as well IMG_20190730_165950_01.jpgIMG_20190730_165950_02.jpg

Sent from my Pixel 3 XL using Tapatalk
 

Attachments

  • IMG_20190730_165950_01.jpg
    IMG_20190730_165950_01.jpg
    90.2 KB · Views: 2,031
  • IMG_20190730_165950_02.jpg
    IMG_20190730_165950_02.jpg
    119.9 KB · Views: 1,938
I carry a first aid kit, an everyday carry kit, 3-cell flashlight, and a bag for hand tools. The other side has a Brooklyn Basher and a case.with Motorola handheld radios. I will be adding tow straps and a few other items as wellView attachment 344996View attachment 344997

Sent from my Pixel 3 XL using Tapatalk
Forgot about my foldable shovel and hatchet. Still lots of room if you are patient with your molle setup.

Sent from my Pixel 3 XL using Tapatalk
 
since i hate rattling, and want to be able to get to things quickly, i have everything in MOLLE pouches on my panel.
 
Sweet thanks for the quick reply, looks like a neat set up. Do those D rings rattle around a lot?
They do rattle a bit but 8t doesn't bother me. I like having them accessable. Could easily put them in a molle pouch and keep them quiet. I do like having this stuff up and off the deck.

Sent from my Pixel 3 XL using Tapatalk
 
They do rattle a bit but 8t doesn't bother me. I like having them accessable. Could easily put them in a molle pouch and keep them quiet. I do like having this stuff up and off the deck.

Sent from my Pixel 3 XL using Tapatalk

i would loop the carbiners to your molle like you stated.. still easy to get too minus the loose change sound over bumps
 
Used mine for tools/first aid/etc. The also serve as the base for my rear cargo shelf. Tied the unistrut to the panels with 3d printed brackets. Load is supported via two legs that go down to the floor.
 

Attachments

  • 1027181640e.jpg
    1027181640e.jpg
    99.9 KB · Views: 2,077
  • 1027181639c.jpg
    1027181639c.jpg
    78.6 KB · Views: 2,151
I have Victory 4x4 molle storage panels. I mainly use them to store recovery gear and some small hand tools. Snatch strap, ropes, soft shackles, snatch blocks, tree savers, kayak tie-down straps, steel shackles, folding shovel, hi-lift jack base, etc. I made the basket on the left by welding expanded steel to 1/4” round stock.

Everything is attached to the panels with Velcro or Maxpedition polymer TacTie clips. The only exceptions are the ropes and kayak straps in the basket.
 

Attachments

  • 814941DC-16B8-43F5-82E5-9E101B685431.jpg
    814941DC-16B8-43F5-82E5-9E101B685431.jpg
    127.8 KB · Views: 1,480
Used mine for tools/first aid/etc. The also serve as the base for my rear cargo shelf. Tied the unistrut to the panels with 3d printed brackets. Load is supported via two legs that go down to the floor.

Cool!

What did you use for that shelf? Sturdy enough to hold heavier camping gear?
 
Cool!

What did you use for that shelf? Sturdy enough to hold heavier camping gear?

Made from black powder coated unistrut I order from McMaster Carr. Also needed a couple bags of t nuts, a few unistrut u brackets. Mesh was from a local metal shop. I have stacked full ammo cans, rifles, shooting table on it before. The vertical legs take the load, rago panels just locate it front to back. Fwiw I posted a shopping list to a thread a few months back.

The rear windows are useless for visibility from the driver's seat anyway so why not use the space?
 
I've got a little of everything on mine. Recovery gear, first aid kit, spare hats, machete, Thermocell, camp sandles, etc.

48898492181_7c0d6da990_b.jpg


48897959238_58a9f332f1_b.jpg
 
thanks! i was looking at these, but this is also my daily driver so i have to be mindful about every day driving situations

My ‘19 TRD Off Road is my daily driver as well and I simply leave the recovery gear mounted there all the time. I’m always prepared for a little off road driving. I could never see out the rear windows while driving anyway, so...
 
Last edited:
Stop bleed kit, paper towels, Jetboil, tool roll, mag pouch. Fire extinguisher, hatchet, molle pouch for winch controls, molle pouch for two 20oz Hydro Flasks, Morakniv,
 

Attachments

  • IMG_20210102_043757_534_resize_35.jpg
    IMG_20210102_043757_534_resize_35.jpg
    61.6 KB · Views: 409
  • IMG_20210102_043757_530_resize_84.jpg
    IMG_20210102_043757_530_resize_84.jpg
    68.8 KB · Views: 398

Members online

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top