What setup is this

[mac424205]

I know there are billies in all four corners but is this a spacer on top of the shock or is it a part of the shock? Also I am assuming this is a spacer in the rear?

 

[mac424205]

Sorry for the sideways pics. For some reason it does that when I use my phone

 

[zopperman]

looks like a front preload spacer.

Can't tell you about the rear w/o seeing the springs

 

[mac424205]

I'm working on that. It also only let's me upload one attachment at a time... Lol

 

[kkz]

Interesting...adjustable billies with spacers?

 

[zopperman]

yup looks like a rear spacer too

Weirdm the billy in front looks like its set at 0" of lift and they used a preload spacer instead. Not the best way to do it

 

[mac424205]

Do I need to get rid of the spacers? Can I crank up the billies and still fit a 33?

 

[mac424205]

So get rid of spacers and crank the billies to what setting?

 

[zopperman]

Do I need to get rid of the spacers? Can I crank up the billies and still fit a 33?

dont do that you'll overextend and ruin the shock

I'd ditch the spacer and set the front at 2.5 and maybe add a 1/4" top plate spacer good for 1/2" of lift, run a 3" lift, do a bit of trimming and throw some 285s on it

also, rear looks like 1.5" daystar spacers

 

[S p a r k y]

Interesting...adjustable billies with spacers?

I have billies with a budget boost top plate spacer, no probs at all, works great! A couple locals have it set up the same! I'm at 1.75 with a 1" spacer, 2"net

 

[zopperman]

I have billies with a spacer, no probs at all, works great! A couple locals have it set up the same! I'm at 1.75 with a 1" spacer, 2"net

is yours a top plate or preload spacer?

i'd be careful fwiw http://www.bilsteinus.com/fileadmin/user_upload/user_upload_us/pdfs/Bil_LevShks_WebArticle_01.pdf

 

[S p a r k y]

is yours a top plate or preload spacer?

Beat you to it!! Was editing when u quoted! OP agree with Zopp on this, don't crank billies with that spacer!

 

[mac424205]

I wont crank them with the spacer. I was asking if I could fit 33's AFTER I take the spacer off and crank the billies.

 

[zopperman]

I wont crank them with the spacer. I was asking if I could fit 33's AFTER I take the spacer off and crank the billies.

not without trimming... i'd probably run a 1/2" net spacer for a full 3" lift if you wanna get 285s

 

[mac424205]

not without trimming... i'd probably run a 1/2" net spacer for a full 3" lift if you wanna get 285s

Ok. Thanks zopperman