Wheel Backspacing/etc. Will these work?

[stanleybb50]

What I really want is this. (One of the OEM Ford Raptor wheels)

 

[stanleybb50]

Might go a little different direction with my wheel choice... Going with the below in 17x8 +10 offset. The bore on these is actually 108mm. Hoping that will be ok. If not, I'll get some hub shims or whatever.

Will be wrapped in 265-70-17 Cooper Discoverer AT3's. Was considering the Toyo Open Country AT2's, but will be going with the tires I've been researching out for the past year in the Coopers... Lol. Unless someone has some great things to say about the Toyos by chance.

Found some pics of these wheels on a Taco, also now below. Ultra Rogue (polished):

Sent from my SCH-I535 using Tapatalk 2

 

[WXman]

The wheels I really want are the Level 8 Guardians. But.. they are only offered in 8.5" width so they are wider than stock. And..you can only get them in either 5.75" backspacing or 4.5" backspacing. The 5.75" would sit too close to the upper a-arms, but the 4.5" would stick out past the fenders and I don't want that look.

So I don't know what to do. :wow:

 

[stanleybb50]

The wheels I really want are the Level 8 Guardians. But.. they are only offered in 8.5" width so they are wider than stock. And..you can only get them in either 5.75" backspacing or 4.5" backspacing. The 5.75" would sit too close to the upper a-arms, but the 4.5" would stick out past the fenders and I don't want that look.

So I don't know what to do. :wow:

Yep. I was originally looking at level 8 scorpions, and ran into similar issues..