Wheel Spacer and Tint Quesiton

[Wizzle93]

So I have the toyotec 3" sitting in my garage it's getting put on this weekend! Im going to be running 285/70/17 nitto terr which are used so maybe isnt stead of 33 like 32. 5(dont know if it makes a different) with trimming do i STILL need 1.25 wheel spacers?

Another thing I'm plan on getting 20% on my front two windows, and 5% on the very back with a 5% strip on the front. Is that 5 on the very back going to make the rest noticeably darker?

 

[Dusty Driftwood]

I personally would not go that dark on the back. My last vehicle had factory privacy glass which was about 35%, I added 20% to that and could barely see behind me at night. Especially if you do a lot of night driving, I would stick to a lighter percentage.
I plan on adding 35% to the Toyota provided "privacy glass" in back of my 4th Gen. I'm sure that will make it more than dark enough to keep prying eyes out.

Check this out before doing anything...
Auto Window Tint Laws | TintCenter Window Tinting

 

[chayos00]

So I have the toyotec 3" sitting in my garage it's getting put on this weekend! Im going to be running 285/70/17 nitto terr which are used so maybe isnt stead of 33 like 32. 5(dont know if it makes a different) with trimming do i STILL need 1.25 wheel spacers?

Another thing I'm plan on getting 20% on my front two windows, and 5% on the very back with a 5% strip on the front. Is that 5 on the very back going to make the rest noticeably darker?

I went with 20% on the back which the tint guy said would equate to about 5% overall. Truthfully I would go 5% on the sides and maybe 20% on the rear. But then again it's dark here in Tucson as we have no street lights due to the observatories, so when there is no moon sometimes I just have to roll the rear window down. So if you don't mind needing to roll down the back window 5% is what I would do again.

As far as the wheel spacers, I just installed mine with my 285/70's this weekend. You will need to trim plus probably remove the front mud flap. Also you will NEED the wheel spacers, as I was about 1/4" from rubbing on the UCA and that little nub on the spindle. But when I took my truck through a dirt field just to see how it ate up the dirt, I did notice the tires had rubbed on the UCA. Better safe than sorry!