windshield washer nozzle

[baja1]

well I was able to clean out the nozzles with a sewing needle and was happy to see I could adjust the angle....but of course I got a little over zealous and broke the needle off flush in one of the holes:crybaby:
even if I removed the gizmo from the hood im guessing theres still no way to get that needle out? (a magnet didn't do it either)

 

[dlbmedic]

Did you try using the sprayer to push it out?


Sent from my iPhone using Tapatalk

 

[baja1]

I did but now that I think about....maybe the key is to block off the other 3 orifices first, i'll give that a try!

 

[gamefreakgc]

I think it might be simpler to snag a nozzle from a junkyard. I doubt you'll ever get that out.

 

[jeech]

Reviving an old thread here, but--

When I was a 3rd gen owner, we were swapping our nozzles with Honda Odyssey nozzles, like this. Anyone know if this works in the 4th gen?

 

[Devbot]

I recommend taking this time to switch over to Honda nozzles. WAYYY better spray pattern

Reviving an old thread here, but--

When I was a 3rd gen owner, we were swapping our nozzles with Honda Odyssey nozzles, like this. Anyone know if this works in the 4th gen?

I dont see why not, they're not particularly complicated things. Wouldnt hurt to buy one and try it, they're only a buck or two

 

[brillo_76]

We have a thread on spraying nozzles in the forum here. One with even 3 point nozzles part numbers from a newer Toyota that snap right in. It actually has many options for replacement nozzles with part numbers included. Possibly even those Honda ones as I believe many are mentioned in it.

Sent from my SM-J337V using Tapatalk

 

[Devbot]

not to hijack but if anybody knows of a good replacement for the rear I'm all ears personally! The spray pattern back there sucks

 

[4x3Lander]

not to hijack but if anybody knows of a good replacement for the rear I'm all ears personally! The spray pattern back there sucks

I’ve been hoping there is a fix for the rear nozzle too. Mine streams out and when I installed rear molle panels for both sides of the rear cargo windows, I ensured I looked at the clear tubing the fluid flows through. Nothing blocking.

 

[HiLife]

Front spray nossles out of a Rav4 works great. It has 3 streams each.

 

[TheDurk]

I was in the earlier thread. I installed these:

Amazon.com: Genuine Honda 76810-TK8-A01 Windshield Washer Nozzle Assembly: Automotive

They are easy to install and work great.

 

[Twan]

Front spray nossles out of a Rav4 works great. It has 3 streams each.

The Honda Odyssey nozzles are infinitely better than those, which is what I had before the Hondas.

 

[brillo_76]

I believe mine are the rav4 3 spray nozzles. I adjusted them to my liking. Work alot better then the OEM ones.

I prefer the streams because of winter as the streams with good deicing windshield fluid to assist in melting the frost of the windshield.

Misting i dont think would provide the volume of fluid i am after for this feature.

May work great for others though.

Sent from my SM-J337V using Tapatalk

 

[brillo_76]

The thread I was referring to on this forum.

It lists a pile of different options with one being the Honda Nozzles. :flame:


https://www.toyota-4runner.org/3rd-gen-t4rs/144247-washer-spray-nozzles.html?highlight=Wiper+nozzles