Zak's 03 Limited Build Thread

momo.75 said:
Just look at them as good Birthday or Christmas presents....lol. If you have a pic of your truck from the rear you could photoshop the tails instead of going through the hassle of PD'ing them....:yo:
Click to expand...

You're FULL of good ideas today momo! Birthday is coming up in a few months....
 
I am not familiar with those. I couldn't tell if they were Hub-centric or not. I would stick with Motorsport tech, Spidertrax or All Pro spacers.
 
few quick and easy mods came today

interior LED swap (what a difference from stock):

matte black TRD decals:


Sliders are in the works, talking to a buddy who does fab work.
 
Last edited:
Did some work today -

installed 2 new audiobahn tweeters in the front doors and they sound awesome. The highs are much clearer and they didn't blow up like the stock ones. No pics but I can post some of the install if anyone needs. Currently running them with stock bass blockers.

You can see the interior LED upgrade I did in one of the pics below. They look great, probably about 5000k color temp, match my HIDs.

Also, honest opinions -

I tapped these into the old running board lights so they come on when the door is open:

do they look stupid?


 
I like them. Maybe a little blue from the look of the pics, but I'm planning to do something similar when I remove my running boards.
 
HHIRunner said:
I like them. Maybe a little blue from the look of the pics, but I'm planning to do something similar when I remove my running boards.
Click to expand...

Yeah, i just had these laying around collecting dust. I may do white eventually, they're cheap enough. I think I'll make them run the full length when I get my sliders.
 
Where did you pick those up from? the ones I've been looking at have a lot more spacing between the LEDs than those.
 
zopperman said:
fun little 5 dollar mod today



Click to expand...

Get rid of these before it's too late! I had these for a few months, and by that time, I had to get new tires. I had gotten the new tires, but, to my surprise, my Tire Pressure sensors were all broken as the caps had corroded my valve stems.... 80 more per wheel.
 
Stuck CAPS said:
Get rid of these before it's too late! I had these for a few months, and by that time, I had to get new tires. I had gotten the new tires, but, to my surprise, my Tire Pressure sensors were all broken as the caps had corroded my valve stems.... 80 more per wheel.
Click to expand...

Weird. Momo, have you had any issues? I also have an 03 so no TPS
 
I have had mine for several years with no issues. Granted i don't have TPS, but my caps are also plastic, so i shouldn't have a problem.
 
Stuck CAPS said:
Get rid of these before it's too late! I had these for a few months, and by that time, I had to get new tires. I had gotten the new tires, but, to my surprise, my Tire Pressure sensors were all broken as the caps had corroded my valve stems.... 80 more per wheel.
Click to expand...

Agreed, get the plastic ones, NOT the metal ones, cost me 2 or 300 bucks to get my stems changed out once they rusted onto the valves and wouldn't come off. Do NOT recommend them.
 
I like the led strip mod under the doors, what did you tap into for them?

EDIT: NVM, running board lights, wonder if I have a place to tap that on my SR5...
 
how/where did you get the blue led's for the interior back lighting? did you do the dash also?
 
You must log in or register to reply here.

Similar threads

P
FS: 1996 3RD GEN 4Runner 4x4 | $6999 | Chicago, IL
Replies
2
Views
4K
pfeenstra
P
D
FS/T: 2006 4Runner V8 4WD Limited, rare 3rd row (SoCal)
Replies
10
Views
2K
rarferngully
R
xskydivingdudex
Xskydivingdudex’s Build Thread 2.0
Replies
1
Views
973
honda250xtitan
H
M
1997 3rd Gen For Sale, 5spd, $12k
Replies
5
Views
2K
Mort82
M
J
Aftermarket Switch installation
Replies
4
Views
4K
Runnin on E
R

Members online

Total: 988 (members: 2, guests: 986)

Forum statistics

Threads
278,312
Messages
3,554,087
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top