Recent content by Nooga_Rock

I bought a set of pro comp 51's steel rock crawlers. I also got 1/4" spacers for the front after hearing the front rubs calipers. I've been running this for years now, but have been warned a few times that the lug nuts in the front only get a few threads. Has anyone dealt with this, what...

Installed the sensor. Unfortunately it's still idling high and struggling to crank. That temporarily fixed the CEL, although I suspect it might come back since I cleared it after doing the MAF cleaning and it probably was only showing the O2 sensor code and I bet the evap code will come back in...

Yeah this looks like the problem. Sensor ordered. Looks like an easy install fortunately.

Okay I got the code P1135. Looks like an O2 sensor?

When I crank my 4runner it sometimes won't crank, it just continues to try and turn over, it almost feels like its flooded. I'll let it sit for a second and it will always eventually crank after a few tries. It also idles high, around 2k rpms. When i put it in gear it continues to idle...

So if I have a 2001 that's idling high, does that mean it's something else?

This seems to be what it is i'm guessing. I watched a couple of youtubes. I'm gonna pull it out this weekend and take a look at it, might be able to mess with it without having to buy another one.

It wasn't on the dash but under, if that makes a difference. It's in the passenger side under the glovebox on the left. (you can see it in the picture, that's what I tapped)

Hi, i'm getting a buzzing noise that lasts about 20 seconds when i first crank up that's coming form under the glove box. I think it's something related to the A/C. For a while it didn't have any noticeable effect, but unfortunately, i tapped on it a few times with a coffee mug and now my A/C...

I have a small dent about the size of a dime that has rust. My 4runner is black, is it possible to use rust reformer on this spot and just leave it the Matt black it turns into?

I like those sliders and your truck looks great, but to me those look more flat? I'm looking for the ones that are more angled up, that's what I mean by "tucked in"

I'm starting to look around for a set of rock sliders. There's a lot of good options out there. I've noticed some sets have a much more tucked in look. Is this from that particular brand or is that the angle its welded at? I much prefer this look over the flat. I would love to see some...

Are they pretty easy to replace?

The motor in my antenna is broken. I can't get it to completely lower, it will to about halfway. I'm wanting To run it through a car wash but I'm worried it'll break off. Is it possible to lower it all the way some how?

I've had codes for an evap leak fora while now. I tried new gas cap and replacing the evap canister with one from a parted out 4runner. The code has come back both times. I know I have a hole in my muffler, could that be setting it off?